Activity
From 03/29/2025 to 04/27/2025
04/21/2025
- JC 02:54 PM Software Development: RE: Video encoding power performance
- Nothing beyond some of the MIPI camera streaming.
Do you have a specific encoding in mind? A gstreamer pipeline we could try? - Have you done any performance testing with video encoding? We are specifically looking for the power consumption delta between AM62A HW encode vs AM62 software encoding.
04/17/2025
- JC 01:22 PM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- We also have specific guides on how to build our u-boot and kernel linked below.
https://support.criticallink.com/redmine/projects/mitysom_am62x/wiki/U-Boot_Building_for_MitySOM-AM62
https://support.criticallink.com/redmine/projects/... - MW 12:57 PM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- The links to our git repositories and branch names for the kernel and uboot (you'll want the latest / scarthgap release) are at the top of the
[[Repositories_and_Pre-built_Images]] page. This includes the dts files you'll need to modif... - RD 12:44 PM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Hi Mike,
I did the same setup using the TI Debian SDK v10.00. It booted successfully, and I have the default TI kernel and kernel headers. I also installed the EtherCAT IGH Master.
I want to bring up one point: I entered manual boo... - MW 12:22 PM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Hi Rajkumar,
Ok. I rebuilt the image using TI's SDK 10.01 debian trixie am62pxx-evm build (vs. the am62xx build) and only copied the boot files (in the first partition) and added our device tree. I left the kernel and modules the sa... - RD 06:01 AM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Hi Mike,
Just to clarify, I hadn’t found the link below previously—it looks like it was updated recently:
https://support.criticallink.com/redmine/projects/mitysom_am62x/wiki/Updating_the_TI_EVM_Debian_Image_for_the_MitySOM-AM62x_D...
04/16/2025
- MW 08:11 PM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Hi Rajkumar,
The image I provided was for a MitySOM-AM62x, not an MitySOM-AM62P. You'll need to redo what I have listed in the link below with our AM62P reference image. Sorry for the inconvenience.
https://support.criticallink.c... - JC 02:41 PM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Note replace references of am62x with am62p. So make sure to download the am62p tisdk image and but still start with the am62 debian image.
TI does have a 62p debian sdcard image as well, though in reality they should be mostly iden... - RD 01:31 PM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Hi Mike,
I'll try the image that you sent and will update you on the status.
Thank you. - MW 01:09 PM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Hi Rajkumar,
Can you try this image?
https://support.criticallink.com/files/mitysom62x/tisdk-debian-trixie-mitysom-am62xx-devkit.wic.xz
I am working on instruction.
Thanks,
Mike
- RD 11:41 AM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Hi Mike,
Thanks for your reply.
I flashed the reference microSD card image (Debian) provided by Critical Link, not the one from TI.
https://support.criticallink.com/redmine/projects/mitysom_am62x/wiki/Repositories_and_Pre-built_Im... - MW 11:18 AM Software Development: RE: Debian SDK Not booting in am62p (Am62x dev kit)
- Hi Rajkumar,
Did you note the (brief) instructions here:
https://support.criticallink.com/redmine/projects/mitysom_am62x/wiki/Repositories_and_Pre-built_Images#Debian-Image-Not-typically-needed
The reference image from TI will n... - Hello There,
We have a MitySOM-AM62x Development Kit and the AM62P family SoM as well. I flashed the Debian image onto the SD card and tried to boot the board, but it didn't boot, and nothing is printing on the Putty terminal (/tty/US...
04/14/2025
- MW 10:49 PM PCB Development: RE: STP model missing mounting hole
- Hi Brian,
I uploaded an new export for the file requested. I think the hole should be visible in that model. Sorry for the inconvenience.
-Mike
- I have 80-001614RI-2_STEP_RevA.step and it does not have a hole for the standoff called out in the carrier board design guide. Would you be able to upload a new step model?
04/08/2025
- JC 08:11 PM Software Development: RE: realtime linux on am62x
- Hi sorry for the delay. I am a bit swamped. This is still on my TODO list.
04/02/2025
- MW 09:43 AM Software Development: RE: uSD card detection error
- Hello,
Can you provide any additional data, e.g.:
1) what was the ambient or the die temperature was of the CPU at the failure point?
2) How many failures did you see? 1 or more? If more, at the same temperature?
3) What SD car... - Hello,
After a certain point during the Temperature Cycling Test, a uSD card insertion error occurred.
The uSD card remained seated and recovered spontaneously after repeated occurrences.
This is the dmesg at that time.
Plea...