Activity
From 05/11/2023 to 06/09/2023
06/05/2023
- JC 06:46 PM PCB Development: RE: VSEL_SD functionality
- No problem. I condensed all this info into a wiki page for future reference as well. And have initiated changes for our datasheet and errata to correct the signal name.
https://support.criticallink.com/redmine/projects/mitysom_am62x... - PS 06:25 PM PCB Development: RE: VSEL_SD functionality
- Thank you very much to both of you for the quick and extensive answer. The key information that the voltage of VDDSHV5 is controlled via the VSEL_SD pin might be worth putting into the datasheet. Special thanks for the pointers on the er...
- JC 05:51 PM PCB Development: RE: VSEL_SD functionality
- The software side of the SD voltage selection is configured here:
https://support.criticallink.com/gitweb/?p=linux-ti.git;a=blob;f=arch/arm64/boot/dts/ti/k3-am62x-mitysom-devkit.dts;h=725aba2f30bb44c86b9d86d432cae15f3b08f067;hb=refs/h... - JC 03:02 PM PCB Development: RE: VSEL_SD functionality
- Pal Szabo wrote:
> What is the functionality of the VSEL_SD pin (position 176 on the SODIMM connector)? Is it the same signal as VD_SEL mentioned in Note 8 in the MitySOM-AM62 datasheet on page 18? The datasheet does not contain more in... - PS 09:05 AM PCB Development: RE: JTAG TRSTn pulldown and other JTAG pullups
- Thank you very much Mike, this clarifies the implemented pulls!
06/04/2023
- MW 10:37 AM PCB Development: RE: VSEL_SD functionality
- Hi Paul,
The VSEL_SD pin is connected to pin 12 of a TPS65219 PMIC on the SOM. VSEL_SD selects which voltage is applied to the AM62x VDDSHV5 voltage domain. The voltage is also present on the edge connector pin 172 as (VDDSHV_SDIO)....
06/03/2023
- What is the functionality of the VSEL_SD pin (position 176 on the SODIMM connector)? Is it the same signal as VD_SEL mentioned in Note 8 in the MitySOM-AM62 datasheet on page 18? The datasheet does not contain more information about it, ...
06/02/2023
- MW 12:56 PM PCB Development: RE: JTAG TRSTn pulldown and other JTAG pullups
- I corrected the last post. TDO is not pulled up or down on the SOM.
- MW 12:55 PM PCB Development: RE: JTAG TRSTn pulldown and other JTAG pullups
- Hello,
The SOM includes the following on the JTAG related lines:
* 4.7K Pulldown on TRSTn
* 4.7k Pullup to VDDSHV_MCU on the following lines:
** TCK
** TDI
** TMS
** EMU0
** EMU1
This is a snippet of the schematic on the S... - The AM62x datasheet states (in section 6.4) that an external pulldown is required on the TRSTn line. Is this implemented on the module (if so, it might not be publicly documented), or the host board needs to add this pulldown?
What ab...