Mity CPU Platforms » MitySOM-AM57X

06/30/2025

MW 10:02 AM FPGA Development: RE: Requesting the source/origin for the fpga bin in the default image in the sd card provided along with the evk.

Hello,
It is the same one as documented on the [[FPGA_Example_Projects]] page. The only difference is that the target device was changed to the 50 KLE part number instead of the 15 KLE part number in the project settings.
Please l... Michael Williamson

TR 05:32 AM FPGA Development: Requesting the source/origin for the fpga bin in the default image in the sd card provided along with the evk.

Hi,
We are working currently with the AM57 devkit with FPGA and using the sd card image provided along with the evk.
Our query is regarding the *fpga_7a50t.bin* file in the image.
Specifically, if there is any source project avai... Thejas Raj

06/11/2025

TR 06:00 AM Software Development: RE: Interfacing pca9535 with arm using i2c expanders (J5)(i2c5)

Thank you
Will update if anything else comes up. Thejas Raj

06/10/2025

JC 03:07 PM Software Development: RE: Interfacing pca9535 with arm using i2c expanders (J5)(i2c5)

Thejas Raj wrote in message#6981:
> Hi,
> ...
First please note that the R6/T9 pins will be 1.8V logic level. If your device is 3.3V logic level you will need a voltage translator similar to U5 on the devkit.
> Can you give us the ... Jonathan Cormier

TR 10:04 AM Software Development: RE: Interfacing pca9535 with arm using i2c expanders (J5)(i2c5)

Hi,
So we were able to interface i2c5 of the evk with our pca 9535 i2c device.
As of now we also require i2c4 of the evk/som whose scl and sda are currently muxed to gpio7_3 (R6) and gpio7_4 (T9) respectively.
Can you give us the... Thejas Raj