Activity
From 10/23/2024 to 11/21/2024
11/07/2024
- AK 07:00 AM Software Development: RE: Hello World on DSP
- Hello Jonathan,
Thank you for the reply. I will check and get back to you.
11/04/2024
- JC 03:04 PM Software Development: RE: Hello World on DSP
- Arun Krishnan wrote in message#6783:
> Hello Jonathan,
> ...
We don't have support for running the DSP barebones without u-boot or linux.
I'd recommend booting the SOM into Linux. You should still be able to connect to the DSP ov... - AK 05:17 AM Software Development: RE: Hello World on DSP
- Hello Jonathan,
My requirement is to use DSP to communicate with some of the peripherals and then use IPC for data transfer between Arm core and DSP core. II plant test the DSP without Linux first using using debug probe and then late...
10/25/2024
- JC 03:56 PM Software Development: RE: eMMC not enabling on Docker based image buiding
- Does the following guide make sense? https://support.criticallink.com/redmine/projects/mitysom_am62x/wiki/Customizing_the_yocto_build#Add-your-custom-kernel-device-tree-to-the-kernel-recipe
- SS 07:26 AM Software Development: RE: eMMC not enabling on Docker based image buiding
- Hi,
> Do you need help getting your changes from the native Linux build into the yocto build?
-- Yes, need help for the same.
I didnt get the below modifications described in the previous reply. Do i need to modify kernel like this?
10/24/2024
- JC 08:50 PM Software Development: RE: Hello World on DSP
- Hi Arun,
How are you loading the processor with the ARM RTOS and DSP RTOS? What boot media are you using, you said you aren't using sdcard? In my experience, we would boot into u-boot and then use u-boot to load the FPGA, DSP and AR... - AK 06:56 AM Software Development: RE: Hello World on DSP
- > The pinmux should be set up by u-boot, there should be no need to touch the pinmux in the DSP. There is a wiki page, on how to configure the pinmux in u-boot. https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/U-Boot_...