Activity
From 04/15/2023 to 05/14/2023
05/12/2023
- MF 08:00 AM Software Development: RE: Example USB (usb 3.0 port) is not work
- * R59<notextile>(</notextile>USB_ID) behavior
> Can you measure the voltage on R59? (this is on the underside of the board and should be unpopulated). Both sides should be ~1.8V when no drive is plugged in.
> ...
Both sides were 1.77...
05/11/2023
- JC 03:29 PM PCB Development: RE: eMMC support for MitySOM AM572x
- Sandeep Sivadas wrote:
> Hi,
> ...
The memory size depends on how much space you need for your product
For example this one, MTFC64GAPALBH-IT, which comes in a variety of sizes 8GB, 16GB, 32GB, 64GB, 128GB, e.MMC v5.1, 153-ball TFB... - JC 03:11 PM Software Development: RE: Example USB (usb 3.0 port) is not work
- Note it can also be a good idea to try a usb-C connector in both directions in case one direction is broken.
- JC 03:05 PM Software Development: RE: Example USB (usb 3.0 port) is not work
- )Masayoshi Furuta wrote in message#6343:
> > tisdk-rootfs-image-mitysom-am57x-20210909.rootfs.img.zip
> ...
Okay, at least we are working from a known state.
>
> ...
Can you measure the voltage on R59? (this is on the underside of t... - MF 01:21 AM Software Development: RE: Example USB (usb 3.0 port) is not work
- > tisdk-rootfs-image-mitysom-am57x-20210909.rootfs.img.zip
The new image could NOT solve the problem either.
I was able to download the image you restored and tried the USB 3.0 host operation.
However, when I connected the device,...
05/10/2023
- JC 02:40 PM Software Development: RE: Example USB (usb 3.0 port) is not work
- Jonathan Cormier wrote in message#6341:
> Masayoshi Furuta wrote:
> ...
Main server has been restored - JC 02:11 PM Software Development: RE: Example USB (usb 3.0 port) is not work
- Masayoshi Furuta wrote:
> https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/Example_usb
> ...
Sorry you caught us at a bad time, we had a power outage yesterday so the support site was switched over to a backup locat... - https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/Example_usb
I tested with this procedure and got the following results.
We tested with two DevKits with the same results.
* USB-2.0 Ports on MitySOM AM54 board r...
05/09/2023
- JC 01:37 PM Software Development: RE: Yocto build for mitySOM AM57x
- Sandeep Sivadas wrote in message#6337:
> Hi,
> ...
You can update/customize the kernel without rebuilding the whole filesystem. You just need to update the files located on the boot partition of the sdcard.
See https://support.criti... - SS 04:29 AM Software Development: RE: Yocto build for mitySOM AM57x
- Hi,
1. In the meantime, you should be able to use the released filesystem and replace just the kernel on it. And be able to make headway with customizing your kernel.
Q. Can you please clarify the point above.I didnt get how to d... - Hi,
We need to integrate eMMC Flash with MitySOM SOM. Please suggest appropriate Part No: for the same.
What will be the memory size needed for eMMC ?
Thanks and regards
Sandeep S
05/08/2023
- JC 07:19 PM Software Development: RE: Yocto build for mitySOM AM57x
- Added some fixes for a few recipes which SRC urls changed slightly. Let me know if you run into any more issues.
05/05/2023
- JC 01:55 PM Software Development: RE: Yocto build for mitySOM AM57x
- Looks like it built successfully this time. I'll let you know how I get along with the systemd issue, I may not have time until next week.
In the meantime, you should be able to use the released filesystem and replace just the kernel... - SS 01:47 AM Software Development: RE: Yocto build for mitySOM AM57x
- Hi,
I have tried to rebuild qtbase as told above. The log files are attaching here.
Thanks & regards
Sandeep s
05/04/2023
- JC 10:18 PM Software Development: RE: Yocto build for mitySOM AM57x
- Hi Sandeep,
I've run into some issues building the systemd package during the build. I am looking into it. - JC 01:17 PM Software Development: RE: Yocto build for mitySOM AM57x
- 1. Great
2. I'm not sure what would have caused this file to get truncated. Seems like some kind of file corruption, not sure. Can you try to rebuild just qtbase? @MACHINE=mitysom-am57x bitbake qtbase -c cleanall && MACHINE=mitysom-... - SS 08:45 AM Software Development: RE: Yocto build for mitySOM AM57x
- Hi,
1. I tried the custom-crops modifications and got the menuconfig window.
2. I have tried to build MACHINE=mitysom-am57x bitbake tisdk-rootfs-image, but got some errors as shown below
ERROR: qtbase-5.11.3+gitAUTOINC+08de243ea...
05/03/2023
- JC 02:12 PM Software Development: RE: Yocto build for mitySOM AM57x
- Sandeep Sivadas wrote in message#6329:
> Hi,
> ...
The arago-base-tisdk-image is a minimal filesystem that doesn't include the packages for the video driver or an Xserver.
You can check arago-base-tisdk-image-mitysom-am57x.manifest t... - SS 12:25 PM Software Development: RE: Yocto build for mitySOM AM57x
- Hi,
Thank you for your support.
I tried the updated steps for yocto build and it worked fine.
1. The command i used for bitbake build is "MACHINE=mitysom-am57x bitbake arago-base-tisdk-image". The image written to the SD card and ...
05/02/2023
- JC 03:18 PM Software Development: RE: Yocto build for mitySOM AM57x
- Wiki has been updated. Thanks for reporting this.
- JC 03:07 PM Software Development: RE: Yocto build for mitySOM AM57x
- Sandeep Sivadas wrote in message#6326:
> Hi,
> ...
Hi Sandeep, the crops/poky group decided they needed a newer python, etc in their 18.04 ubuntu image which breaks the older thud build. We can work around this by mounting an empty t... - SS 05:40 AM Software Development: RE: Yocto build for mitySOM AM57x
- Hi,
Thank you for your support.
I have followed the steps in the link you provided. https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/Linux_Kernel_Yocto_for_MitySOM-AM57X
But got some error as shown below.
_
_...
05/01/2023
- JC 02:32 PM Software Development: RE: Yocto build for mitySOM AM57x
- sandeep Sivadas wrote:
> Hi,
> ...
The correct config file is processor-sdk-06.03.00.106-cl-external-config.txt
See https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/Linux_Kernel_Yocto_for_MitySOM-AM57X - MW 01:01 PM Software Development: RE: Yocto build for mitySOM AM57x
- Summary repo link:
https://support.criticallink.com/gitweb/?p=meta-mitysom.git;a=summary - MW 01:00 PM Software Development: RE: Yocto build for mitySOM AM57x
- Hi Sandeep,
That repository is mirrored here:
https://support.criticallink.com/git/meta-mitysom.git
I think you should be able to update the URL for this repository.
We will look into updating the config file and remove our i... - Hi,
We purchased MitySOM AM572x development kit and trying to build our own yocto linux.
Then we have a problem while cloning the branches of mitysom AM57x.
While cloning the below git files, it shows as "fatal: unable to access 'h...