Mity CPU Platforms

09/06/2025

12:36 AM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: RE: AM62Px: DeepSleep/MCU Only LPM fails to resume

Hi Jonathan, it turns out the MCU console was freezing on suspend due to the device manager R5F isolating the I/O pad... Connor Larmer

09/05/2025

06:37 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: RE: AM62Px: DeepSleep/MCU Only LPM fails to resume

Connor Larmer wrote in message#7037:
> Hi Jonathan,
>
> After removing the resistors, Deepsleep is functioning no... Jonathan Cormier

05:10 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: RE: AM62Px: DeepSleep/MCU Only LPM fails to resume

Hi Jonathan,
After removing the resistors, Deepsleep is functioning now. As for MCU only mode, we have been able t... Connor Larmer

02:34 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: RE: AM62Px: DeepSleep/MCU Only LPM fails to resume

Jonathan Cormier wrote in message#7035:
> I just tested SDK 11 with an unmodified devkit and a modified one and veri... Jonathan Cormier

09/04/2025

10:23 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: RE: AM62Px: DeepSleep/MCU Only LPM fails to resume

Hi Connor, please review the following redmine. https://support.criticallink.com/redmine/projects/mitysom_am62x/wiki/... Jonathan Cormier

02:22 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: RE: AM62Px: DeepSleep/MCU Only LPM fails to resume

Connor Larmer wrote:
> Hello,
>
> We have a Critical Link development board with an AM62Px SOM (4GB). Currently, ... Jonathan Cormier

09/03/2025

11:07 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: AM62Px: DeepSleep/MCU Only LPM fails to resume

Hello,
We have a Critical Link development board with an AM62Px SOM (4GB). Currently, we are attempting to validat... Connor Larmer

01:23 PM MitySOM-A5 FPGA Development: RE: What is the recommended version of Quartus for MitySOM_A5?

Hello Maxim -
Just getting back to you on our plan for a reference project. The reference project that we will be... Thomas Catalino

09/02/2025

07:36 PM MitySOM-A5 FPGA Development: RE: What is the recommended version of Quartus for MitySOM_A5?

Hello Maxim,
You only need 1 100 MHz reference clock to run the PCIe transceiver blocks. You should be able to us... Michael Williamson

02:08 PM MitySOM-A5 FPGA Development: RE: Fail to program device

As shown by the log file it appears that you do not have the ARM toolchain installed. It is failing to compile the bo... Mike Fiorenza

08/29/2025

08:36 PM MitySOM-A5 PCB Development: RE: PCIe connection to Computer MB

Hello,
yes, actually it is worse than that.. the FPGA can only tolerate about 10mA, and must be less than 1.2V d... Keith Murison

06:50 PM MitySOM-A5 PCB Development: RE: PCIe connection to Computer MB

Hi Keith,
I don't think you can drive it in the FPGA (PCIe needs to be up fairly quickly and may need to be there ... Michael Williamson

12:36 AM MitySOM-A5 PCB Development: RE: PCIe connection to Computer MB

Hi,
Actually, there is another issue, in EP mode, the Presecence signals, PRSNT2_*X1*# and PRSNT2_*X4*# need to ... Keith Murison

06:25 PM MitySOM-A5 FPGA Development: RE: What is the recommended version of Quartus for MitySOM_A5?

Hello Tom,
Thanks for the explanation.
Me and Keith, we are working together. We've ordered a cable (PCIe edge on... Maxim Kanevsky

06:13 PM MitySOM-A5 FPGA Development: RE: Fail to program device

Mike, please see attached log of the compilation Maxim Kanevsky

06:07 PM MitySOM-A5 FPGA Development: RE: Fail to program device

Hello Mike,
No I didn't made any changes. I removed everything. I clone again, navigate to directory and run comma... Maxim Kanevsky