Mity CPU Platforms » MitySOM-5CSX Altera Cyclone V

06/17/2020

MM 09:04 AM FPGA Development: mitySom 5csx and opencl 19.1

Hello,
I have a MitySom 5csx and I am trying to run the opencl helloworld program described here:
https://support.criticallink.com/redmine/projects/mityarm-5cs/wiki/MitySOM-5CSX_DevKit_OpenCL_BSP,
The version I want to use is ... Matthieu Moretti

06/04/2020

CF 06:27 PM Software Development: Build Preloader failed in Windows 10

Hello,
We used to be able to build preloader in Windows 7 environment. However, not any more after we upgraded to Windows 10. Same u-boot package and same build procedures. So we think the OS change might be the course for the failur... chad fan

05/27/2020

DR 03:33 PM FPGA Development: RE: FPGA programming problems

I will do that.
Thank you very much Dan.
Dario Dario Russo

DV 02:33 PM FPGA Development: RE: FPGA programming problems

Hi Dario,
You could also try using the "sync" linux command after you copy the rbf over. That should flush anything out to the SD card. I normally do a sync and a reboot after updating the RBF. Seeing as the filesystem is read/write d... Daniel Vincelette

DR 02:15 PM FPGA Development: RE: FPGA programming problems

Hi Dan,
Don't worry, I really appreciate your help.
Yes, running “reboot” works and it is the only way to change the FPGA configuration without rebooting the system multiple times. Indeed, even if I change the rbf and then I turn the ... Dario Russo

DV 12:53 PM FPGA Development: RE: FPGA programming problems

Hi Dario,
My apologizes for the later reply, it was a long holiday weekend in the states.
So by running "reboot" after copying over the RBF fixed your problem?
Dan Daniel Vincelette