Activity
From 09/01/2014 to 09/30/2014
09/30/2014
-
12:41 PM
Software Development: RE: Static IP Adderess
- Hi Dan,
That works! Thank you!
Jack - DV 09:26 AM Software Development: RE: Static IP Adderess
- Hello Jack,
Is your PC a windows machine? If so I believe if you have the firewall on then it will block any ping requests. So if you disable your firewall on your PC then that might solve this issue. Let me know how it goes.
Dan
09/29/2014
-
06:54 PM
Software Development: Static IP Adderess
- Hi,
I tried to set a static IP address to the system, by changing the /etc/network/interface file (See below). Because we want to communicate it directly via ethernet without the USB cable.
The issue is that having assigned IP addr...
09/17/2014
- PB 02:36 PM Software Development: RE: Standard USB peripheral connection on MitySOM eval Board
- Hi,
I'm now quite stuck without the ability to use use the host mode.
I have noticed on Rocketboards something recent that seems related to the issue I'm facing :
http://git.rocketboards.org/?p=linux-socfpga.git;a=commit;h=a3a81b0... - AB 11:29 AM FPGA Development: RE: Load FPGA Timeout Error
- Max,
Thank you for posting that.
You are correct that if VBAT is too low the module will either not boot at all and/or will not allow the FPGA to be programmed. We believe that on earlier development kits the ESD bags may have cont... - MB 10:41 AM FPGA Development: RE: Load FPGA Timeout Error
- Hi Dan,
I had similar problem last week. After two week I tried to run my development board loading the FPGA with JTAG and using Uboot.
JTAG was not able to connect and with Uboot the return message was:
altera_load: Failed with e...
09/11/2014
- MW 06:34 PM Software Development: RE: U-Boot with large uImage containing initramfs
- Hi Nicholas,
A little confused. Your build_ramdisk_image.sh appears to be building a 1 GB image for loading an SD card, which contains including multiple partitions, etc.
You want to create a raw ext2 or ext3 image only, not a ful...
09/10/2014
- NC 04:03 PM Software Development: RE: U-Boot with large uImage containing initramfs
- Michael Williamson wrote:
> We've run into this issue before on a different ARM based processor.
> ...
Mike,
I still have had no luck with the initramfs, Just can't get it to go past that Starting Kernel message. I've tried several ...
09/03/2014
- I am having problems DE-allocating DMA memory space. Allocation works correctly with dma_alloc_coherent. I get the following
out of dmesg:
[ 4.345091] Virt Address : c095c000 Phys Address: 4095c000 Handle: 3e8c0000
This is after...