Activity
From 08/30/2014 to 09/28/2014
09/17/2014
- PB 02:36 PM Software Development: RE: Standard USB peripheral connection on MitySOM eval Board
- Hi,
I'm now quite stuck without the ability to use use the host mode.
I have noticed on Rocketboards something recent that seems related to the issue I'm facing :
http://git.rocketboards.org/?p=linux-socfpga.git;a=commit;h=a3a81b0... - AB 11:29 AM FPGA Development: RE: Load FPGA Timeout Error
- Max,
Thank you for posting that.
You are correct that if VBAT is too low the module will either not boot at all and/or will not allow the FPGA to be programmed. We believe that on earlier development kits the ESD bags may have cont... - MB 10:41 AM FPGA Development: RE: Load FPGA Timeout Error
- Hi Dan,
I had similar problem last week. After two week I tried to run my development board loading the FPGA with JTAG and using Uboot.
JTAG was not able to connect and with Uboot the return message was:
altera_load: Failed with e...
09/11/2014
- MW 06:34 PM Software Development: RE: U-Boot with large uImage containing initramfs
- Hi Nicholas,
A little confused. Your build_ramdisk_image.sh appears to be building a 1 GB image for loading an SD card, which contains including multiple partitions, etc.
You want to create a raw ext2 or ext3 image only, not a ful...
09/10/2014
- NC 04:03 PM Software Development: RE: U-Boot with large uImage containing initramfs
- Michael Williamson wrote:
> We've run into this issue before on a different ARM based processor.
> ...
Mike,
I still have had no luck with the initramfs, Just can't get it to go past that Starting Kernel message. I've tried several ...
09/03/2014
- I am having problems DE-allocating DMA memory space. Allocation works correctly with dma_alloc_coherent. I get the following
out of dmesg:
[ 4.345091] Virt Address : c095c000 Phys Address: 4095c000 Handle: 3e8c0000
This is after...