Mity CPU Platforms » MitySOM-5CSX Altera Cyclone V

03/21/2014

RB 06:15 PM FPGA Development: RE: Time limited SOF file question

Hi Mike,
Never mind my last post, I found the jtag breakout board in my original shipment.
-rb
Rich Bagdazian

RB 06:09 PM FPGA Development: RE: Time limited SOF file question

Thanks Mike,
Makes sense. I have a Terasic USB Blaster as shown in the attached PDF file.
What's the best way to interface the USB blaster to the white breakout connector on the MityArm Board?
Rich
Rich Bagdazian

MW 03:19 PM FPGA Development: RE: Time limited SOF file question

Hi Rich,
This is an answer from our Altera FAE:
_You can’t create .rbf files from time limited sof files. The concern is that you could put the .rbf in flash and reconfigure every hour to avoid paying for the IP. Some our 3rd pa... Michael Williamson

RB 02:04 PM FPGA Development: Time limited SOF file question

I built a component into the FPGA that includes an instance of the Altera FIR II compiler.
At the end of the build, the final output is named: mityarm_5csx_dev_board_time_limited.sof
The file converter utility does not seem to be wil... Rich Bagdazian

03/20/2014

12:36 PM Software Development: RE: Reading memory into a file

Hi,
Is there a way for memtool to output the memory into a file?
Thanks,
Jack Anonymous

03/05/2014

GG 05:24 PM Software Development: RE: Reading memory into a file

Hi Jack,
It may take us some time to get to the bottom of this. We'll post in this thread as soon as we have additional information.
Please keep us informed if you run into any issues with the current work around of not running '... Gregory Gluszek

12:51 PM Software Development: RE: Reading memory into a file

Any update on this?? Anonymous

03/03/2014

05:59 PM Software Development: RE: Reading memory into a file

Hi Greg,
I have no problem with the software wihtout first sending the command to enable the SDRAM. The data that I get from memtool matches the data that I get from my software.
Thanks!
Jack Anonymous

GG 05:56 PM Software Development: RE: Reading memory into a file

Hi Jack,
Do you run into any problems if you use your software without first sending the command to enable the SDRAM? We'll try to get you an explanation for what you're seeing and in the mean time try using your software without run... Gregory Gluszek

03:45 PM Software Development: RE: Reading memory into a file

Hi,
I managed to read memory into a file but we got another problem.
We are following your example - write to hps memory. In that example a command has to be issued in order to write to memory via the FPGA
memtool -32 0xffc25080... Anonymous

02/27/2014

BD 02:40 PM Software Development: RE: Reading memory into a file

Jack,
We don't have any general examples to provide.
If you're trying to share data over FTP or ssh in a human-readable format, you can use fprintf to print the data from memory into a file.
http://www.cplusplus.com/reference/... Bob Duke

02:21 PM Software Development: Reading memory into a file

Hi,
Do you have any examples on reading memory in software?
We need to grab the data we have in memory into a file and export it via Ethernet.
Thanks!
Jack Anonymous

02/22/2014

MW 07:48 AM Software Development: RE: Yocto Plug-In Python.exe Error

Can you post a capture of your complete shell interaction? Michael Williamson