Project

General

Profile

Activity

From 05/16/2013 to 06/14/2013

06/02/2013

MW 07:11 AM PCB Development: RE: MityArm 335x Minimum Voltage Operation
Hello Mr. Schantzen,
Very sorry for the delay in response.
We are looking into this spec, because at first glance I believe we may be able to lower it a bit for the module.
However, before we can alter the spec we will need to...
Michael Williamson
MW 07:03 AM PCB Development: RE: VSC8601/VSC8641 PHY Discontinued
Hi Michael,
Yes, we have also seen this notification. It doesn't look like there is a drop-in replacement in the same package / footprint available, though we have only started investigating the problem.
Vitesse's product notifica...
Michael Williamson

05/31/2013

MK 02:43 PM PCB Development: VSC8601/VSC8641 PHY Discontinued
Vitesse just announced the VSC8601/VSC8641 part will be discontinued. Are there alternative PHYs that can be used? Michael Karasoff

05/30/2013

TI 08:50 AM Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
Apologies...
I checked the git status before pushing and completely missed the board/cl tree (for some reason I was expecting to see all the files in the dir as untracked, not just the top of the untracked tree).
Anyway... I updated gi...
Tim Iskander
KW 08:24 AM Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
I encountered an error building branch u-boot-2013.01. Files in board/cl/mityarm335x are missing. Here's the make error: Kim Weller

05/28/2013

TI 03:44 PM Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
Finally... I have a u-boot image that will boot from the 512MB (4096k page) NAND.
It is now based on the main-line u-boot instead of the TI PSP flavor.
Use the _u-boot-2013.01_ branch from the CL repository @support.criticallink.com:/h...
Tim Iskander

05/17/2013

TI 04:15 PM Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
Another pre-weekend update...
I finally (after battling mr. Murphy numerous times) got the MLO and U-Boot loading from the 4k page flash.
I need to get the rest of u-boot in order now, but the MityARM-335X DDR3 module with the 512MB fl...
Tim Iskander

05/16/2013

MW 02:33 PM Software Development: RE: RTC Not Keeping Time Between Power Cycles
BTW: If you have a smart-phone, you should be able to download a free data-matrix code reader.
-Mike
Michael Williamson
MW 02:31 PM Software Development: RE: RTC Not Keeping Time Between Power Cycles
Check the "Module Product Change Notifications":http://support.criticallink.com/redmine/projects/armc8-platforms/wiki/Module_Product_Change_Notifications section for details. You should "watch" this page, any published changes or defect... Michael Williamson
BC 02:25 PM Software Development: RE: RTC Not Keeping Time Between Power Cycles
Thanks for the quick reply Mike.
I modified my kernel config to enable the TPS65910.
CONFIG_RTC_DRV_TPS65910=y
#CONFIG_RTC_DRV_OMAP=y
Recompiled and tested and indeed it shows up when booting:
Brian Compter
MW 01:37 PM Software Development: RE: RTC Not Keeping Time Between Power Cycles
Hi Brian,
Can you let me know which revision of AM3359 module you have? The RTC power design was updated in Rev C.
I think you either have the wrong RTC module (the AM3359 on-board RTC, which does not get power from the battery du...
Michael Williamson
BC 12:42 PM Software Development: RTC Not Keeping Time Between Power Cycles
We are using a 3359 development board and have found that the RTC is not keeping time between power cycles. Each time power is cycled, the clock changes to December 23 2011 11:41 AM.
I've compiled the very latest kernel kernel (2013-...
Brian Compter
 

Also available in: Atom