Activity
From 10/21/2019 to 11/19/2019
11/19/2019
- JC 03:47 PM Software Development: RE: NAND Flash
- Could you provide all the information on the barcode located on the module? Serial number, model number, etc.
It looks like you have a custom version of the UBL and u-boot.
Some oddities are that your clocks are non standard. U-b... - MG 06:30 AM Software Development: RE: NAND Flash
- Boot log
11/18/2019
- JC 03:04 PM Software Development: RE: NAND Flash
- Please attach a complete boot log. And the output of 'printenv'
- Hello,
I have a board based on MityDSP-L138 with 4 Gb NAND Flash (MT29F4G08ABADAWP). And I use MityDSP-L138 u-boot (U-Boot 2009.11). But I probably have problem with ECC calculation. After some time during booting I get message:
11/13/2019
- JC 04:25 PM Software Development: RE: Enabling UART2 for MitydspL138F Expansion port at ARM running Linux
- Aviv Prital wrote:
> Hi,
> ...
To use a peripheral on the L138 you need to ensure the pinmux is set correctly and the appropriate driver is enabled.
UART2 is already setup in the kernel for use as an RS-485 port (though without the ...
11/12/2019
- Hi,
I'd like to use MitydspL138F Expansion port to get another serial connection to be used by Linux application.
What should be done for this (at U-boot, kernel, etc)?
I found some 6 years old related thread which was not completed...
10/25/2019
- AB 03:42 PM Software Development: RE: L138-FX-225-RC not available at Digikey
- Happy to hear you're all set and thanks for bringing the description issue to our attention.
I have forwarded your comments to our marketing team to look into it.
Alex
10/24/2019
- IS 11:24 PM Software Development: RE: L138-FX-225-RC not available at Digikey
- Thank you. I actually just found this out. I was misdirected because the digikey descriptor for that part was
MITYDSP-+L138F+ SOM W/ OMAP-L138
and I believed that the L138F means it had an FPGA included. However, the part number ... - AB 09:27 PM Software Development: RE: L138-FX-225-RC not available at Digikey
- The MityDSP-L138 family (both with and without the FPGA) is still in active production and is planned to be over the next 5 years plus.
The issue you are running into is actually due to this PCN20180209000 (https://support.criticalli... - I am developing for the L138-FX-225-RC MityDSP board. I can no longer source them at Digikey. All pages come back 404. There are pages for the L138(F) with FPGA but I am no FPGA programmer. Can anyone tell me what the MityDSP L138 path i...