Activity
From 09/08/2017 to 10/07/2017
10/06/2017
- Hi,
I'm trying to figure out how best to gain access to one of the two SPI ports on the L138. I have an Industrial I/O board with an L138F module and we want to interface it with some external eval board hardware that has SPI slave c...
09/29/2017
- TR 07:09 PM FPGA Development: RE: Example fpga bin file
- Never mind... I was able to successfully use the bin file out of build_dvi_revc_lx45 to validate with the Impact tool. Thanks
09/28/2017
- Hi,
I'm using MDK_2014-01-03 and wanted to just validate the FPGA programming mechanisms outlined in the wiki. Is there a generic .bin file available to test with or do I have to build one from the examples? Thanks, Tom - OÇ 08:19 AM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Thanks.
09/27/2017
- TR 07:29 PM Software Development: RE: MDK version?
- Bob... sounds good thanks, Tom
- BD 07:21 PM Software Development: RE: MDK version?
- Tom,
For following the Wiki, the "Release 2014.01" MDK is the best choice right now. The Wiki documentation has not been updated to match the newest MDK releases (e.g. Release 2017.08 - BETA).
After you work through some examples... - Hi,
Just getting started here with a MityDSP L138F dev system. The USB stick had release 2011-03-31. Which is the best MDK release to use that the examples listed on the wiki coincide with? It appears Alpha release 2016.01 is more too...
09/26/2017
- TR 08:15 PM FPGA Development: RE: L138F breakout adapter pinout
- Alex, thanks... Regs, Tom
- AB 07:22 PM FPGA Development: RE: L138F breakout adapter pinout
- Tom,
You can find the pin-out of the JTAG adapter board in the datasheet for the board (http://www.criticallink.com/wp-content/uploads/80-000286_L138_Debug_Adapter.pdf).
Please let us know if you need anything else,
Alex - Hi,
Can someone point me to the docs that outline the pin assignments for the 2 user connectors on the emulator adapter board -- Critical Link (CL) part number 80-000286.
Thanks, Tom
09/22/2017
- GG 10:04 PM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Hi Okan,
* Q: void* DspAddr: What is the physical address of DSP that I should be reading from ARM?
* A: This depends on how you structure your application. One example would be having the DSP allocate a chunk of heap data and filli... - OÇ 07:06 AM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Hi Greg,
Thanks for your reply.
I examined @dspapp.cpp@ in the MDK, and noticed @ReadMemory()@ is a simplified version of the @PROC_read()@ function of DspLink. About the function arguments:
*@void* DspAddr@:* What is the physical...
09/21/2017
- GG 03:05 PM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Hi Okan,
Regarding your need for the ARM to read memory written by the DSP there is a function call ReadMemory() in the ARM tcDspApp class. If you setup a structure where the DSP uses DspLink to communicate an address the ARM is to r... - OÇ 06:21 AM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Hello again,
I consulted to my colleague. It turns out, we don't insist on using SysLink instead of DspLink. But we definitely need a shared memory mechanism where the DSP writes some data to the memory, send an interrupt to the ARM, an... - OÇ 05:43 AM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Hi Greg,
The communication method Critical Link provides is great; the code was easy to follow and I understood most of it.
The problem is that it supports only message buffers, but we may need to use "shared memory" communications...
09/20/2017
- GG 02:39 PM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Hi Okan,
As a qualification I want to mention that DspLink is the communications and control method Critical Link supports and recommends using at this point. Our MDK provides wrappers around DspLink for loading the DSP via the ARM a... - OÇ 05:39 AM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Hi Greg,
Thanks for your response. My first question was really confusing me, so thanks for the explanation.
Considering neither Critical Link nor TI technically supports DspLink anymore (you provide your own functions instead, and the...
09/19/2017
- GG 03:10 PM Software Development: RE: Inter-Processor Communication between ARM & DSP
- Hi Okan,
Here is some feedback regarding your questions:
# DSP/BIOS is the RTOS that runs on the DSP. However, unlike an OS like Linux, which needs to be installed, DSP/BIOS does not. I believe it is simply compiled into the .out ... - Hi,
I've been working on a MityDsp L138F board with Linux Ångström run by the ARM core. I'm expected to learn and implement various possible IPC methods to make the cores communicate with each other.
* I've successfully implemented t...
09/11/2017
- JC 01:24 PM Software Development: RE: Touchscreen is not detected
- Jonathan Cormier wrote:
> Hmm we've used several different cap touchscreens over the years though I'm only aware of ones we've used on the 335x. However they've all been i2c based so the L138 should be a problem.
*shouldn't be a pro... - JC 01:23 PM Software Development: RE: Touchscreen is not detected
- Andri Haryono wrote:
> Thanks Jonathan for your reply,
> ...
Hmm we've used several different cap touchscreens over the years though I'm only aware of ones we've used on the 335x. However they've all been i2c based so the L138 should ...
09/10/2017
- AH 06:06 AM Software Development: RE: Touchscreen is not detected
- Thanks Jonathan for your reply,
I have follow you guidance. it improve the LCD touchsceen response. However, it's still hard to be used.
Do you have recommendation on capacitive touchscreen that supported by Critical link?
regards,