MitySOM-5CSX development kit
Added by John Iannuzzi 10 days ago
Hi! I am just starting out with the MitySOM-5CSX development kit and have the following tools set up:
1. Quartus prime 23.1
2. Ubuntu 24.04.2 LTS operating system
3. U-boot 2024.01 source tree
4. I don't have an embedded LINUX source tree set up yet.
Will what I have installed work with your demo projects, or do I have to install the tools that you have recommended?
It seems that I'm pretty close with what I have.
Also, is this the proper forum to use?
Any guidance would be appreciated.
Thanks.
John
Replies (2)
RE: MitySOM-5CSX development kit - Added by Mike Fiorenza 10 days ago
John,
Our latest reference design for the 5CSx is on Quartus Prime version 23.1, therefore you should be good! These reference designs can be found here: 23.1-stable
U-boot is compiled as part of the FPGA compile flow. Therefore, our Makefile in the reference project will checkout our version of socfpga_v2023.07 from git://support.criticallink.com/home/git/u-boot-socfpga.git and compile it after it compiles the FPGA design.
For the Linux kernel source, it can be found here: git://support.criticallink.com/home/git/linux-socfpga.git using branch socfpga-6.1.55-lts
For our full documentation for building the FPGA/Bootloader/Kernel/Filesystem see our wiki page here: https://support.criticallink.com/redmine/projects/mityarm-5cs/wiki
Lastly, this is the correct spot to be posting any FPGA related questions for the MitySOM-5CSX.
Let us know if you have any further questions.
- Mike
RE: MitySOM-5CSX development kit - Added by John Iannuzzi 9 days ago
Ok Mike,
Thanks.
Best regards,
John
