|
Booting Linux on physical CPU 0x0
|
|
Linux version 3.14.8+ (jcormier@jcormier-fedora) (gcc version 4.5.4 20120305 (prerelease) (GCC) ) #23 PREEMPT Tue Jun 24 10:52:06 EDT 2014
|
|
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
|
|
CPU: VIVT data cache, VIVT instruction cache
|
|
Machine: MityDSP-L138/MityARM-1808
|
|
Ignoring unrecognised tag 0x42000101
|
|
Memory policy: Data cache writethrough
|
|
DaVinci da850/omap-l138/am18x variant 0x1
|
|
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 24384
|
|
Kernel command line: mem=96M console=ttyS1,115200n8 mtdparts=nand:128M(rootfs),-(userfs) root=/dev/mtdblock0 rw,noatime rootfstype=jffs2
|
|
PID hash table entries: 512 (order: -1, 2048 bytes)
|
|
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
|
|
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
|
|
Memory: 91776K/98304K available (3759K kernel code, 229K rwdata, 1280K rodata, 153K init, 157K bss, 6528K reserved)
|
|
Virtual kernel memory layout:
|
|
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
|
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
|
|
vmalloc : 0xc6800000 - 0xff000000 ( 904 MB)
|
|
lowmem : 0xc0000000 - 0xc6000000 ( 96 MB)
|
|
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
|
|
.text : 0xc0008000 - 0xc04f4018 (5041 kB)
|
|
.init : 0xc04f5000 - 0xc051b6bc ( 154 kB)
|
|
.data : 0xc051c000 - 0xc05554c0 ( 230 kB)
|
|
.bss : 0xc05554cc - 0xc057cb1c ( 158 kB)
|
|
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
|
|
Preemptible hierarchical RCU implementation.
|
|
NR_IRQS:245
|
|
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
|
|
Console: colour dummy device 80x30
|
|
Calibrating delay loop... 148.88 BogoMIPS (lpj=744448)
|
|
pid_max: default: 32768 minimum: 301
|
|
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
|
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
|
CPU: Testing write buffer coherency: ok
|
|
Setting up static identity map for 0xc0390378 - 0xc03903d0
|
|
devtmpfs: initialized
|
|
pinctrl core: initialized pinctrl subsystem
|
|
regulator-dummy: no parameters
|
|
NET: Registered protocol family 16
|
|
DMA: preallocated 256 KiB pool for atomic coherent allocations
|
|
cpuidle: using governor ladder
|
|
cpuidle: using governor menu
|
|
baseboard_pre_init: Entered
|
|
mityomapl138_setup_nand: using 8 bit data
|
|
#### spi len: 3
|
|
baseboard_init [IndustrialIO]...
|
|
bio: create slab <bio-0> at 0
|
|
SCSI subsystem initialized
|
|
usbcore: registered new interface driver usbfs
|
|
usbcore: registered new interface driver hub
|
|
usbcore: registered new device driver usb
|
|
VDCDC1: 1150 <--> 1350 mV at 1200 mV
|
|
VDCDC2: 3300 mV
|
|
VDCDC3: 1800 mV
|
|
LDO1: 1800 mV
|
|
LDO2: 2500 <--> 3300 mV at 3300 mV
|
|
Advanced Linux Sound Architecture Driver Initialized.
|
|
Switched to clocksource timer0_1
|
|
NET: Registered protocol family 2
|
|
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
|
|
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
|
|
TCP: Hash tables configured (established 1024 bind 1024)
|
|
TCP: reno registered
|
|
UDP hash table entries: 256 (order: 0, 4096 bytes)
|
|
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
|
|
NET: Registered protocol family 1
|
|
RPC: Registered named UNIX socket transport module.
|
|
RPC: Registered udp transport module.
|
|
RPC: Registered tcp transport module.
|
|
RPC: Registered tcp NFSv4.1 backchannel transport module.
|
|
futex hash table entries: 256 (order: -1, 3072 bytes)
|
|
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
|
|
msgmni has been set to 179
|
|
io scheduler noop registered (default)
|
|
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
|
|
serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25, base_baud = 9375000) is a 16550A
|
|
serial8250.1: ttyS1 at MMIO 0x1d0c000 (irq = 53, base_baud = 9375000) is a 16550A
|
|
console [ttyS1] enabled
|
|
serial8250.2: ttyS2 at MMIO 0x1d0d000 (irq = 61, base_baud = 9375000) is a 16550A
|
|
brd: module loaded
|
|
at24 1-0050: 256 byte 24c02 EEPROM, read-only, 0 bytes/write
|
|
MityOMAPL138: Found MAC = 00:50:c2:e6:70:b5
|
|
MityOMAPL138: Part Number = L138-DG-225-RI
|
|
ahci ahci: forcing PORTS_IMPL to 0x1
|
|
ahci ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
|
|
ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc
|
|
scsi0 : ahci_platform
|
|
ata1: SATA max UDMA/133 mmio [mem 0x01e18000-0x01e19fff] port 0x100 irq 67
|
|
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
|
|
nand: Micron MT29F2G08ABAEAWP
|
|
nand: 256MiB, SLC, page size: 2048, OOB size: 64
|
|
Bad block table found at page 131008, version 0x01
|
|
Bad block table found at page 130944, version 0x01
|
|
Creating 2 MTD partitions on "davinci_nand.1":
|
|
0x000000000000-0x000008000000 : "rootfs"
|
|
mityomapl138_notify_add: Entered - mtd->name rootfs
|
|
0x000008000000-0x000010000000 : "homefs"
|
|
mityomapl138_notify_add: Entered - mtd->name homefs
|
|
davinci_nand davinci_nand.1: controller rev. 2.5
|
|
spi_davinci spi_davinci.1: request RX DMA channel failed
|
|
CAN device driver interface
|
|
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
|
|
ohci ohci.0: DA8xx OHCI
|
|
ohci ohci.0: new USB bus registered, assigned bus number 1
|
|
Waiting for USB PHY clock good...
|
|
ohci ohci.0: irq 59, io mem 0x01e25000
|
|
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
|
|
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
usb usb1: Product: DA8xx OHCI
|
|
usb usb1: Manufacturer: Linux 3.14.8+ ohci_hcd
|
|
usb usb1: SerialNumber: ohci.0
|
|
hub 1-0:1.0: USB hub found
|
|
hub 1-0:1.0: 1 port detected
|
|
usbcore: registered new interface driver usb-storage
|
|
mousedev: PS/2 mouse device common for all mice
|
|
omap_rtc da830-rtc: rtc core: registered da830-rtc as rtc0
|
|
da830-rtc: RTC power up reset detected
|
|
da830-rtc: already running
|
|
i2c /dev entries driver
|
|
davinci_mmc da830-mmc.0: Can't get dma_tx channel
|
|
davinci_mmc da830-mmc.0: Using PIO, 4-bit mode
|
|
usbcore: registered new interface driver usbhid
|
|
usbhid: USB HID core driver
|
|
soc-audio soc-audio.0: ASoC: machine MityDSP-L138 INDIO should use snd_soc_register_card()
|
|
soc-audio soc-audio.0: ASoC: CODEC spi1.2 not registered
|
|
ata1: SATA link down (SStatus 0 SControl 300)
|
|
platform soc-audio.0: Driver soc-audio requests probe deferral
|
|
TCP: cubic registered
|
|
NET: Registered protocol family 17
|
|
can: controller area network core (rev 20120528 abi 9)
|
|
NET: Registered protocol family 29
|
|
can: raw protocol (rev 20120528)
|
|
mmc0: new high speed SDHC card at address 1234
|
|
mmcblk0: mmc0:1234 SA04G 3.67 GiB
|
|
mmcblk0: p1
|
|
LDO2: incomplete constraints, leaving on
|
|
LDO1: incomplete constraints, leaving on
|
|
VDCDC3: incomplete constraints, leaving on
|
|
VDCDC2: incomplete constraints, leaving on
|
|
VDCDC1: incomplete constraints, leaving on
|
|
regulator-dummy: incomplete constraints, leaving on
|
|
soc-audio: probe of soc-audio.0 failed with error -22
|
|
console [netcon0] enabled
|
|
netconsole: network logging started
|
|
omap_rtc da830-rtc: setting system clock to 2000-01-06 18:49:07 UTC (947184547)
|
|
ALSA device list:
|
|
No soundcards found.
|
|
jffs2: Empty flash at 0x050e8af4 ends at 0x050e9000
|
|
jffs2: Empty flash at 0x074c7018 ends at 0x074c7800
|
|
jffs2: Empty flash at 0x074c9100 ends at 0x074c9800
|
|
jffs2: Empty flash at 0x07bcd108 ends at 0x07bcd800
|
|
VFS: Mounted root (jffs2 filesystem) on device 31:0.
|
|
devtmpfs: mounted
|
|
Freeing unused kernel memory: 152K (c04f5000 - c051b000)
|