|
/*
|
|
* Critical Link MityOMAP-L138 SoM Baseboard initializtaion file
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/usb/musb.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/setup.h>
|
|
#include <mach/mux.h>
|
|
#include <mach/da8xx.h>
|
|
#include <linux/can/platform/mcp251x.h>
|
|
|
|
#define BASEBOARD_NAME "IndustrialIO"
|
|
#define MSTPRI2_LCD_MASK 0x70000000
|
|
#define MSTPRI2_LCD_SHIFT 28
|
|
#define LCD_PRIORITY 0 /* make video output highest priority */
|
|
|
|
#define MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
|
|
#define MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
|
|
#define SYSTEM_RESET GPIO_TO_PIN(5, 14)
|
|
#define ADF4158_CS_N GPIO_TO_PIN(2, 15) /* FOR US IS TO SELECT CHIP ADF4158 */
|
|
#define ADF4360_CS_N GPIO_TO_PIN(0, 8) /* FOR US IS TO SELECT CHIP ADF4360 */
|
|
#define CAN_INT_PIN GPIO_TO_PIN(2, 12)
|
|
//#define DSD1791_CS_N GPIO_TO_PIN(0, 8) /* COMMENTED OUT */
|
|
#define DAC8551_CS_N GPIO_TO_PIN(0, 15)
|
|
#define ADS5560_CS_N GPIO_TO_PIN(0, 6)
|
|
|
|
static int baseboard_mmc_get_ro(int index)
|
|
{
|
|
return gpio_get_value(MMCSD_WP_PIN);
|
|
}
|
|
|
|
static int baseboard_mmc_get_cd(int index)
|
|
{
|
|
return !gpio_get_value(MMCSD_CD_PIN);
|
|
}
|
|
|
|
static struct davinci_mmc_config da850_mmc_config = {
|
|
.get_ro = baseboard_mmc_get_ro,
|
|
.get_cd = baseboard_mmc_get_cd,
|
|
.wires = 4,
|
|
.max_freq = 50000000,
|
|
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
|
|
.version = MMC_CTLR_VERSION_2,
|
|
};
|
|
|
|
static const short da850_mmcsd0_pins[] __initconst = {
|
|
DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
|
|
DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
|
|
DA850_GPIO4_0, DA850_GPIO4_1,
|
|
-1
|
|
};
|
|
|
|
static __init void baseboard_setup_mmc(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = davinci_cfg_reg_list(da850_mmcsd0_pins);
|
|
if (ret)
|
|
pr_warning("%s: mmcsd0 mux setup failed: %d\n", __func__, ret);
|
|
|
|
ret = gpio_request(MMCSD_CD_PIN, "MMC CD\n");
|
|
if (ret)
|
|
pr_warning("%s: can not open GPIO %d\n", __func__,
|
|
MMCSD_CD_PIN);
|
|
gpio_direction_input(MMCSD_CD_PIN);
|
|
|
|
ret = gpio_request(MMCSD_WP_PIN, "MMC WP\n");
|
|
if (ret)
|
|
pr_warning("%s: can not open GPIO %d\n", __func__,
|
|
MMCSD_WP_PIN);
|
|
gpio_direction_input(MMCSD_WP_PIN);
|
|
|
|
ret = da8xx_register_mmcsd0(&da850_mmc_config);
|
|
if (ret)
|
|
pr_warning("%s: mmcsd0 registration failed: %d\n", __func__,
|
|
ret);
|
|
}
|
|
|
|
/*
|
|
* GPIO pins, this is an exhaustive list which may be overridden by
|
|
* other devices
|
|
*/
|
|
static short baseboard_gpio_pins[] __initdata = {
|
|
DA850_GPIO0_0, DA850_GPIO0_1, DA850_GPIO0_2, DA850_GPIO0_3,
|
|
DA850_GPIO0_4, DA850_GPIO0_5, DA850_GPIO0_6, DA850_GPIO0_7,
|
|
DA850_GPIO0_8, DA850_GPIO0_9, DA850_GPIO0_10, DA850_GPIO0_11,
|
|
DA850_GPIO0_12, DA850_GPIO0_13, DA850_GPIO0_14, DA850_GPIO0_15,
|
|
DA850_GPIO2_12, DA850_GPIO2_15, -1,
|
|
};
|
|
|
|
/* davinci da850 evm audio machine driver */
|
|
static u8 da850_iis_serializer_direction[] = {
|
|
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
|
|
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
|
|
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
|
|
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
|
|
};
|
|
|
|
static struct snd_platform_data baseboard_snd_data = {
|
|
.tx_dma_offset = 0x2000,
|
|
.rx_dma_offset = 0x2000,
|
|
.op_mode = DAVINCI_MCASP_IIS_MODE,
|
|
.num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
|
|
.tdm_slots = 0,
|
|
.serial_dir = da850_iis_serializer_direction,
|
|
.asp_chan_q = EVENTQ_1,
|
|
.version = MCASP_VERSION_2,
|
|
.txnumevt = 0,
|
|
.rxnumevt = 0,
|
|
};
|
|
|
|
static short baseboard_mcasp_pins[21] __initdata = {
|
|
DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
|
|
DA850_AHCLKR,
|
|
-1, -1, -1, -1,
|
|
-1, -1, -1, -1,
|
|
-1, -1, -1, -1,
|
|
-1, -1, -1, -1,
|
|
-1
|
|
};
|
|
|
|
static __init int baseboard_setup_mcasp(void)
|
|
{
|
|
int ret;
|
|
|
|
baseboard_mcasp_pins[4+0] = DA850_AXR_15;
|
|
da850_iis_serializer_direction[15] = TX_MODE;
|
|
|
|
ret = davinci_cfg_reg_list(baseboard_mcasp_pins);
|
|
if (ret)
|
|
pr_warning("%s: mcasp mux setup failed: %d\n", __func__, ret);
|
|
|
|
ret = gpio_request(SYSTEM_RESET, "SYSTEM RESET\n");
|
|
if (ret)
|
|
pr_warning("%s: can't open GPIO %d\n", __func__, SYSTEM_RESET);
|
|
msleep(20);
|
|
gpio_direction_output(SYSTEM_RESET, 0);
|
|
msleep(20);
|
|
gpio_set_value(SYSTEM_RESET, 1);
|
|
|
|
baseboard_snd_data.tdm_slots = 2;
|
|
baseboard_snd_data.txnumevt = 1;
|
|
|
|
da8xx_register_mcasp(0, &baseboard_snd_data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct display_panel disp_panel = {
|
|
QVGA,
|
|
16,
|
|
16,
|
|
COLOR_ACTIVE,
|
|
};
|
|
|
|
static struct lcd_ctrl_config lcd_cfg = {
|
|
&disp_panel,
|
|
.ac_bias = 255,
|
|
.ac_bias_intrpt = 0,
|
|
.dma_burst_sz = 16,
|
|
.bpp = 16,
|
|
.fdd = 255,
|
|
.tft_alt_mode = 0,
|
|
.stn_565_mode = 0,
|
|
.mono_8bit_mode = 0,
|
|
.invert_line_clock = 0,
|
|
.invert_frm_clock = 0,
|
|
.sync_edge = 0,
|
|
.sync_ctrl = 1,
|
|
.raster_order = 0,
|
|
};
|
|
|
|
static struct da8xx_lcdc_platform_data sharp_lq035q7dh06_pdata = {
|
|
.manu_name = "sharp",
|
|
.controller_data = &lcd_cfg,
|
|
.type = "Sharp_LQ035Q7DH06",
|
|
};
|
|
|
|
static struct da8xx_lcdc_platform_data chimei_p0430wqlb_pdata = {
|
|
.manu_name = "ChiMei",
|
|
.controller_data = &lcd_cfg,
|
|
.type = "ChiMei_P0430WQLB",
|
|
};
|
|
|
|
static struct da8xx_lcdc_platform_data vga_640x480_pdata = {
|
|
.manu_name = "VGA",
|
|
.controller_data = &lcd_cfg,
|
|
.type = "vga_640x480",
|
|
};
|
|
|
|
static struct da8xx_lcdc_platform_data wvga_800x480_pdata = {
|
|
.manu_name = "WVGA",
|
|
.controller_data = &lcd_cfg,
|
|
.type = "wvga_800x480",
|
|
};
|
|
|
|
static struct da8xx_lcdc_platform_data svga_800x600_pdata = {
|
|
.manu_name = "SVGA",
|
|
.controller_data = &lcd_cfg,
|
|
.type = "svga_800x600",
|
|
};
|
|
|
|
static struct da8xx_lcdc_platform_data nec_nl4827hc19_pdata = {
|
|
.manu_name = "NEC",
|
|
.controller_data = &lcd_cfg,
|
|
.type = "NEC_NL4827HC19-05B",
|
|
};
|
|
|
|
static __init void baseboard_setup_lcd(const char *panel)
|
|
{
|
|
int ret;
|
|
struct da8xx_lcdc_platform_data *pdata;
|
|
|
|
u32 prio;
|
|
|
|
/* set peripheral master priority up to 1 */
|
|
prio = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_MSTPRI2_REG));
|
|
prio &= ~MSTPRI2_LCD_MASK;
|
|
prio |= LCD_PRIORITY<<MSTPRI2_LCD_SHIFT;
|
|
__raw_writel(prio, DA8XX_SYSCFG0_VIRT(DA8XX_MSTPRI2_REG));
|
|
|
|
if (!strcmp("Sharp_LQ035Q7DH06", panel))
|
|
pdata = &sharp_lq035q7dh06_pdata;
|
|
else if (!strcmp("ChiMei_P0430WQLB", panel))
|
|
pdata = &chimei_p0430wqlb_pdata;
|
|
else if (!strcmp("vga_640x480", panel))
|
|
pdata = &vga_640x480_pdata;
|
|
else if (!strcmp("wvga_800x480", panel))
|
|
pdata = &wvga_800x480_pdata;
|
|
else if (!strcmp("svga_800x600", panel))
|
|
pdata = &svga_800x600_pdata;
|
|
else if (!strcmp("NEC_NL4827HC19-05B", panel)) {
|
|
pdata = &nec_nl4827hc19_pdata;
|
|
lcd_cfg.invert_line_clock = 1;
|
|
lcd_cfg.invert_frm_clock = 1;
|
|
} else {
|
|
pr_warning("%s: unknown LCD type : %s\n", __func__,
|
|
panel);
|
|
return;
|
|
}
|
|
|
|
ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
|
|
if (ret) {
|
|
pr_warning("%s: lcd pinmux failed : %d\n", __func__,
|
|
ret);
|
|
return;
|
|
}
|
|
|
|
ret = da8xx_register_lcdc(pdata);
|
|
}
|
|
|
|
#ifdef CONFIG_MTD
|
|
#define OFFSET_LCDCONFIG 176
|
|
#define LCDCONFIG_LEN 33
|
|
static void baseboard_mtd_notify(struct mtd_info *mtd)
|
|
{
|
|
int retlen;
|
|
char buf[LCDCONFIG_LEN]; /* enable, manufacturer name */
|
|
if (!strcmp(mtd->name, "periph-config")) {
|
|
mtd->read(mtd, OFFSET_LCDCONFIG, LCDCONFIG_LEN, &retlen,
|
|
buf);
|
|
if (retlen == LCDCONFIG_LEN) {
|
|
if (buf[0]) {
|
|
buf[LCDCONFIG_LEN-1] = 0;
|
|
pr_info("Using LCD panel: %s\n", &buf[1]);
|
|
baseboard_setup_lcd(&buf[1]);
|
|
} else
|
|
pr_info("No LCD configured\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct mtd_notifier baseboard_spi_notifier = {
|
|
.add = baseboard_mtd_notify,
|
|
};
|
|
|
|
static void baseboard_mtd_notify_add(void)
|
|
{
|
|
register_mtd_user(&baseboard_spi_notifier);
|
|
}
|
|
#else
|
|
static void baseboard_mtd_notify_add(void) { }
|
|
#endif
|
|
|
|
/* MODIFIED. Commented out */
|
|
/*
|
|
static struct mcp251x_platform_data mcp2515_pdata = {
|
|
.oscillator_frequency = 20000000,
|
|
};
|
|
*/
|
|
|
|
static struct davinci_spi_config spi_adf4158_config = {
|
|
.io_type = SPI_IO_TYPE_POLL, /* MODIFIED. Default value SPI_IO_TYPE_DMA */
|
|
.c2tdelay = 0,
|
|
.t2cdelay = 0,
|
|
};
|
|
|
|
static struct davinci_spi_config spi_adf4360_config = { /* ADDED */
|
|
.io_type = SPI_IO_TYPE_POLL,
|
|
.c2tdelay = 0,
|
|
.t2cdelay = 0,
|
|
};
|
|
/* COMMENTED OUT
|
|
static struct davinci_spi_config spi_dsd1791_config = {
|
|
.io_type = SPI_IO_TYPE_DMA,
|
|
.c2tdelay = 0,
|
|
.t2cdelay = 0,
|
|
}; */
|
|
|
|
#ifdef CONFIG_INDIO_EXPANSION_ANALOGIO
|
|
static struct davinci_spi_config spi_dac8554_config = {
|
|
.io_type = SPI_IO_TYPE_DMA,
|
|
.c2tdelay = 0,
|
|
.t2cdelay = 0,
|
|
};
|
|
static struct davinci_spi_config spi_ads5560_config = {
|
|
.io_type = SPI_IO_TYPE_DMA,
|
|
.c2tdelay = 0,
|
|
.t2cdelay = 0,
|
|
};
|
|
#endif
|
|
|
|
static struct spi_board_info baseboard_spi1_info[] = {
|
|
{
|
|
.modalias = "spidev", /* MODIFIED. Default value mcp2515 */
|
|
/* .platform_data = &mcp2515_pdata, */ /* COMMENTED OUT */
|
|
.controller_data = &spi_adf4158_config,
|
|
.max_speed_hz = 750000, /* MODIFIED. Default value 10000000 */
|
|
.bus_num = 1,
|
|
.chip_select = 1,
|
|
.mode = SPI_MODE_0, /* ADDED. Default value nothing means SPI_MODE_3*/
|
|
},
|
|
/* COMMENTED OUT
|
|
{
|
|
.modalias = "dsd1791",
|
|
.controller_data = &spi_dsd1791_config,
|
|
.max_speed_hz = 1000000,
|
|
.bus_num = 1,
|
|
.chip_select = 2,
|
|
},
|
|
*/
|
|
{
|
|
.modalias = "spidev", /* ADDED */
|
|
.controller_data = &spi_adf4360_config, /* ADDED */
|
|
.max_speed_hz = 750000, /* ADDED */
|
|
.bus_num = 1, /* ADDED */
|
|
.chip_select = 2, /* ADDED */
|
|
.mode = SPI_MODE_0, /* ADDED */
|
|
},
|
|
#ifdef CONFIG_INDIO_EXPANSION_ANALOGIO
|
|
{
|
|
.modalias = "spidev",
|
|
.controller_data = &spi_dac8554_config,
|
|
.max_speed_hz = 10000000,
|
|
.bus_num = 1,
|
|
.chip_select = 3,
|
|
},
|
|
{
|
|
.modalias = "spidev",
|
|
.controller_data = &spi_ads5560_config,
|
|
.max_speed_hz = 10000000,
|
|
.bus_num = 1,
|
|
.chip_select = 4,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_INDIO_EXPANSION_ANALOGIO
|
|
static struct spi_board_info baseboard_spi3_info[] = {
|
|
{
|
|
.modalias = "spidev",
|
|
.max_speed_hz = 10000000,
|
|
.bus_num = 3,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
static u8 spi1_cs[] = {
|
|
SPI_INTERN_CS,
|
|
ADF4158_CS_N, /* MODIFIED */
|
|
/* DSD1791_CS_N, COMMENTED OUT */
|
|
ADF4360_CS_N, /* ADDED */
|
|
#ifdef CONFIG_INDIO_EXPANSION_ANALOGIO
|
|
DAC8551_CS_N,
|
|
ADS5560_CS_N,
|
|
#endif
|
|
};
|
|
|
|
static void __init baseboard_setup_spi(void)
|
|
{
|
|
int ret;
|
|
|
|
/*MODIFIED. Default was CAN_CS_N */
|
|
ret = gpio_request(ADF4158_CS_N, "ADF4158 CS\n");
|
|
if (ret)
|
|
pr_warning("%s: can not open ADF4158 CS %d\n", __func__, ADF4158_CS_N);
|
|
|
|
/* COMMENTED OUT
|
|
ret = gpio_request(DSD1791_CS_N, "DSD1791 CS\n");
|
|
if (ret)
|
|
pr_warning("%s: can not open DSD1791 CS %d\n", __func__,
|
|
DSD1791_CS_N);
|
|
*/
|
|
|
|
/* ADDED */
|
|
ret = gpio_request(ADF4360_CS_N, "ADF4360 CS\n");
|
|
if (ret)
|
|
pr_warning("%s: can not open ADF4360 CS %d\n", __func__, ADF4360_CS_N);
|
|
|
|
|
|
#ifdef CONFIG_INDIO_EXPANSION_ANALOGIO
|
|
ret = gpio_request(DAC8551_CS_N, "DAC8551 LDAC\n");
|
|
if (ret)
|
|
pr_warning("%s: can not open DAC8551 LDAC %d\n", __func__, ret);
|
|
|
|
ret = gpio_request(ADS5560_CS_N, "ADS5560 CS\n");
|
|
if (ret)
|
|
pr_warning("%s: can not open ADS5560 CS %d\n", __func__, ret);
|
|
|
|
ret = spi_register_board_info(baseboard_spi3_info,
|
|
ARRAY_SIZE(baseboard_spi3_info));
|
|
if (ret)
|
|
pr_warning("%s: Unable to register SPI3 Info: %d\n", __func__,
|
|
ret);
|
|
#endif
|
|
|
|
/* DELETED OUT */
|
|
//baseboard_spi1_info[0].irq = gpio_to_irq(CAN_INT_PIN);
|
|
|
|
ret = spi_register_board_info(baseboard_spi1_info,
|
|
ARRAY_SIZE(baseboard_spi1_info));
|
|
if (ret)
|
|
pr_warning("%s: Unable to register SPI1 Info: %d\n", __func__,
|
|
ret);
|
|
}
|
|
|
|
static int __init baseboard_pre_init(void)
|
|
{
|
|
pr_info("%s: Entered\n", __func__);
|
|
da8xx_spi_pdata[1].chip_sel = spi1_cs;
|
|
da8xx_spi_pdata[1].num_chipselect = ARRAY_SIZE(spi1_cs);
|
|
davinci_soc_info.emac_pdata->phy_id = "0:03";
|
|
return 0;
|
|
}
|
|
postcore_initcall_sync(baseboard_pre_init);
|
|
|
|
static int __init baseboard_init(void)
|
|
{
|
|
pr_info("%s [%s]...\n", __func__, BASEBOARD_NAME);
|
|
|
|
davinci_cfg_reg_list(baseboard_gpio_pins);
|
|
|
|
baseboard_setup_mmc();
|
|
|
|
baseboard_setup_spi();
|
|
|
|
baseboard_setup_mcasp();
|
|
|
|
baseboard_mtd_notify_add();
|
|
|
|
mityomapl138_usb_init(MUSB_OTG);
|
|
|
|
return 0;
|
|
}
|
|
arch_initcall_sync(baseboard_init);
|
