sample1.txt - MityDSP-L138 (ARM9 Based Platforms) - Critical Link Support

RE: Still requires ifdown eth0 / ifup eth0 (DHCP) » sample1.txt

Daniel Paley, 01/13/2014 05:59 PM

       root@mityT1-dev:/lib/systemd/system# more networking.service
       [Unit]
       Description=Networking
       Before=getty@tty1.service display-manager.service app.service
       After=dev-tty1.device
       [Service]
       ExecStart=-/etc/init.d/networking start
       Type=oneshot
       [Install]
       WantedBy=multi-user.target
       root@mityT1-dev:/lib/systemd/system#
       # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
       # The loopback interface
       auto lo
       iface lo inet loopback
       # Wireless interfaces
       iface wlan0 inet dhcp
               wireless_mode managed
               wireless_essid any
               wpa-driver wext
               wpa-conf /etc/wpa_supplicant.conf
       iface atml0 inet dhcp
       # Wired or wireless interfaces
       auto eth0
       iface eth0 inet dhcp
               hostname mityT1-dev  # set to my host name
       iface eth1 inet dhcp
       # Ethernet/RNDIS gadget (g_ether)
       # ... or on host side, usbnet and random hwaddr
       iface usb0 inet static
               address 192.168.7.2
               netmask 255.255.255.0
               network 192.168.7.0
               gateway 192.168.7.1
       # Bluetooth networking
       iface bnep0 inet dhcp

(1-1/1)