|
U-Boot SPL 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530)
|
|
DRA752-GP ES2.0
|
|
no pinctrl state for default mode
|
|
** Unable to read file dra7-ipu1-fw.xem4 **
|
|
Firmware loading failed
|
|
Trying to boot from MMC1
|
|
no pinctrl state for default mode
|
|
Loading Environment from FAT... *** Warning - bad CRC, using default environment
|
|
|
|
Loading Environment from MMC... *** Warning - bad CRC, using default environment
|
|
|
|
|
|
|
|
U-Boot 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530)
|
|
|
|
CPU : DRA752-GP ES2.0
|
|
Model: TI AM5748 IDK
|
|
Board: MitySOM-57x Dev Kit Non-FPGA
|
|
DRAM: 2 GiB
|
|
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
|
|
Loading Environment from FAT... *** Warning - bad CRC, using default environment
|
|
|
|
Loading Environment from MMC... *** Warning - bad CRC, using default environment
|
|
|
|
MitySOM-57x - Model No: 5728-PX-4AA-RI Serial No: 21005275 Part Number: 80-001446RI-3A
|
|
Warning: fastboot.board_rev: unknown board revision
|
|
i2c_write: error waiting for data ACK (status=0x116)
|
|
cdce9xx_reg_write: failed for addr:5, ret:-121
|
|
board_set_pru_ethaddr
|
|
Net: Could not get PHY for ethernet@48484000: addr 0
|
|
|
|
Warning: ethernet@48484000 using MAC address from ROM
|
|
eth0: ethernet@48484000
|
|
Hit any key to stop autoboot: 0
|
|
switch to partitions #0, OK
|
|
mmc0 is current device
|
|
SD/MMC found on device 0
|
|
** Unable to read file boot.scr **
|
|
** Unable to read file uEnv.txt **
|
|
switch to partitions #0, OK
|
|
mmc0 is current device
|
|
SD/MMC found on device 0
|
|
4461056 bytes read in 196 ms (21.7 MiB/s)
|
|
90099 bytes read in 5 ms (17.2 MiB/s)
|
|
## Flattened Device Tree blob at 88000000
|
|
Booting using the fdt blob at 0x88000000
|
|
Loading Device Tree to 8ffe7000, end 8ffffff2 ... OK
|
|
|
|
Starting kernel ...
|
|
|
|
[ 0.000000] Booting Linux on physical CPU 0x0
|
|
[ 0.000000] Linux version 4.19.94-yocto-standard (oe-user@oe-host) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architectu4
|
|
[ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
|
|
[ 0.000000] CPU: div instructions available: patching division code
|
|
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
|
|
[ 0.000000] OF: fdt: Machine model: Critical Link MitySOM-AM57x
|
|
[ 0.000000] Memory policy: Data cache writealloc
|
|
[ 0.000000] efi: Getting EFI parameters from FDT:
|
|
[ 0.000000] efi: UEFI not found.
|
|
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool
|
|
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool
|
|
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009d000000, size 32 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool
|
|
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool
|
|
[ 0.000000] cma: Reserved 128 MiB at 0x00000000f6c00000
|
|
[ 0.000000] OMAP4: Map 0x00000000fed00000 to (ptrval) for dram barrier
|
|
[ 0.000000] DRA752 ES2.0
|
|
[ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x470 with crng_init=0
|
|
[ 0.000000] percpu: Embedded 15 pages/cpu s32396 r8192 d20852 u61440
|
|
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 460096
|
|
[ 0.000000] Kernel command line: console=ttyS2,115200n8 cma=128MB drm.edid_firmware=edid/1920x1080.bin video=HDMI-A-1:1920x1080 rt
|
|
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
|
|
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
|
|
[ 0.000000] Memory: 1550312K/1847296K available (10240K kernel code, 336K rwdata, 2820K rodata, 2048K init, 272K bss, 34840K rese)
|
|
[ 0.000000] Virtual kernel memory layout:
|
|
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
|
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
|
|
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
|
|
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
|
|
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
|
|
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
|
|
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB)
|
|
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB)
|
|
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 337 kB)
|
|
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 273 kB)
|
|
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
|
|
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
|
|
[ 0.000000] Tasks RCU enabled.
|
|
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
|
|
[ 0.000000] GIC: Using split EOI/Deactivate mode
|
|
[ 0.000000] OMAP clockevent source: timer1 at 32786 Hz
|
|
[ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys).
|
|
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
|
|
[ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns
|
|
[ 0.000019] Switching to timer-based delay loop, resolution 162ns
|
|
[ 0.000295] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
|
|
[ 0.000305] OMAP clocksource: 32k_counter at 32768 Hz
|
|
[ 0.000764] Console: colour dummy device 80x30
|
|
[ 0.000808] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)
|
|
[ 0.000824] pid_max: default: 32768 minimum: 301
|
|
[ 0.000945] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
|
|
[ 0.000960] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
|
|
[ 0.001516] CPU: Testing write buffer coherency: ok
|
|
[ 0.001550] CPU0: Spectre v2: using ICIALLU workaround
|
|
[ 0.001762] /cpus/cpu@0 missing clock-frequency property
|
|
[ 0.001781] /cpus/cpu@1 missing clock-frequency property
|
|
[ 0.001795] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
|
|
[ 0.059918] Setting up static identity map for 0x80200000 - 0x80200060
|
|
[ 0.079929] rcu: Hierarchical SRCU implementation.
|
|
[ 0.100121] EFI services will not be available.
|
|
[ 0.119992] smp: Bringing up secondary CPUs ...
|
|
[ 0.200379] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
|
|
[ 0.200385] CPU1: Spectre v2: using ICIALLU workaround
|
|
[ 0.200509] smp: Brought up 1 node, 2 CPUs
|
|
[ 0.200521] SMP: Total of 2 processors activated (24.59 BogoMIPS).
|
|
[ 0.200529] CPU: All CPU(s) started in HYP mode.
|
|
[ 0.200537] CPU: Virtualization extensions available.
|
|
[ 0.201102] devtmpfs: initialized
|
|
[ 0.218313] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
|
|
[ 0.218565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
|
|
[ 0.218583] futex hash table entries: 512 (order: 3, 32768 bytes)
|
|
[ 0.222875] pinctrl core: initialized pinctrl subsystem
|
|
[ 0.223395] DMI not present or invalid.
|
|
[ 0.223669] NET: Registered protocol family 16
|
|
[ 0.224867] DMA: preallocated 256 KiB pool for atomic coherent allocations
|
|
[ 0.225781] omap_hwmod: l3_main_2 using broken dt data from ocp
|
|
[ 0.418487] cpuidle: using governor ladder
|
|
[ 0.418521] cpuidle: using governor menu
|
|
[ 0.428590] OMAP GPIO hardware version 0.1
|
|
[ 0.453994] No ATAGs?
|
|
[ 0.454068] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
|
|
[ 0.454084] hw-breakpoint: maximum watchpoint size is 8 bytes.
|
|
[ 0.454924] OMAP DMA hardware revision 0.0
|
|
[ 0.466668] edma 43300000.edma: memcpy is disabled
|
|
[ 0.470079] edma 43300000.edma: TI EDMA DMA engine driver
|
|
[ 0.477282] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
|
|
[ 0.563143] omap-iommu 40d01000.mmu: 40d01000.mmu registered
|
|
[ 0.563330] omap-iommu 40d02000.mmu: 40d02000.mmu registered
|
|
[ 0.563575] omap-iommu 58882000.mmu: 58882000.mmu registered
|
|
[ 0.563809] omap-iommu 55082000.mmu: 55082000.mmu registered
|
|
[ 0.564189] omap-iommu 41501000.mmu: 41501000.mmu registered
|
|
[ 0.564369] omap-iommu 41502000.mmu: 41502000.mmu registered
|
|
[ 0.564652] iommu: Adding device 58820000.ipu to group 1
|
|
[ 0.564731] iommu: Adding device 55020000.ipu to group 2
|
|
[ 0.564857] iommu: Adding device 40800000.dsp to group 0
|
|
[ 0.565081] iommu: Adding device 41000000.dsp to group 3
|
|
[ 0.566325] SCSI subsystem initialized
|
|
[ 0.567367] palmas 0-0058: Irq flag is 0x00000008
|
|
[ 0.593533] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0
|
|
[ 0.595169] SMPS12: supplied by regulator-dummy
|
|
[ 0.596790] SMPS3: supplied by VMAIN
|
|
[ 0.598282] SMPS45: supplied by regulator-dummy
|
|
[ 0.600013] SMPS6: supplied by VMAIN
|
|
[ 0.601618] SMPS7: supplied by VMAIN
|
|
[ 0.603360] SMPS8: supplied by VMAIN
|
|
[ 0.604793] random: fast init done
|
|
[ 0.604977] SMPS9: supplied by VMAIN
|
|
[ 0.605885] LDO1: supplied by VMAIN
|
|
[ 0.621225] LDO2: supplied by VMAIN
|
|
[ 0.631231] LDO3: supplied by VMAIN
|
|
[ 0.641241] LDO4: supplied by VMAIN
|
|
[ 0.641900] LDO5: supplied by regulator-dummy
|
|
[ 0.642569] LDO6: supplied by regulator-dummy
|
|
[ 0.643233] LDO7: supplied by regulator-dummy
|
|
[ 0.643894] LDO8: supplied by regulator-dummy
|
|
[ 0.644554] LDO9: supplied by VMAIN
|
|
[ 0.651556] LDOLN: supplied by VMAIN
|
|
[ 0.661276] LDOUSB: supplied by VMAIN
|
|
[ 0.673753] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
|
|
[ 0.674682] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
|
|
[ 0.674884] media: Linux media interface: v0.10
|
|
[ 0.674924] videodev: Linux video capture interface: v2.00
|
|
[ 0.675003] pps_core: LinuxPPS API ver. 1 registered
|
|
[ 0.675012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
|
[ 0.675033] PTP clock support registered
|
|
[ 0.675062] EDAC MC: Ver: 3.0.0
|
|
[ 0.675836] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
|
|
[ 0.676089] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
|
|
[ 0.680888] Advanced Linux Sound Architecture Driver Initialized.
|
|
[ 0.681709] clocksource: Switched to clocksource arch_sys_counter
|
|
[ 0.689884] NET: Registered protocol family 2
|
|
[ 0.690471] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
|
|
[ 0.690501] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
|
|
[ 0.690564] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
|
|
[ 0.690690] TCP: Hash tables configured (established 8192 bind 8192)
|
|
[ 0.690916] UDP hash table entries: 512 (order: 2, 16384 bytes)
|
|
[ 0.690952] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
|
|
[ 0.691085] NET: Registered protocol family 1
|
|
[ 0.711518] RPC: Registered named UNIX socket transport module.
|
|
[ 0.711529] RPC: Registered udp transport module.
|
|
[ 0.711537] RPC: Registered tcp transport module.
|
|
[ 0.711545] RPC: Registered tcp NFSv4.1 backchannel transport module.
|
|
[ 0.712650] hw perfevents: no interrupt-affinity property for /pmu, guessing.
|
|
[ 0.712845] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
|
|
[ 0.713833] Initialise system trusted keyrings
|
|
[ 0.713962] workingset: timestamp_bits=14 max_order=19 bucket_order=5
|
|
[ 0.719021] squashfs: version 4.0 (2009/01/31) Phillip Lougher
|
|
[ 0.729518] NFS: Registering the id_resolver key type
|
|
[ 0.729542] Key type id_resolver registered
|
|
[ 0.729552] Key type id_legacy registered
|
|
[ 0.729593] ntfs: driver 2.1.32 [Flags: R/O].
|
|
[ 0.731268] Key type asymmetric registered
|
|
[ 0.731281] Asymmetric key parser 'x509' registered
|
|
[ 0.731329] bounce: pool size: 64 pages
|
|
[ 0.731362] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
|
|
[ 0.731373] io scheduler noop registered
|
|
[ 0.731382] io scheduler deadline registered
|
|
[ 0.731481] io scheduler cfq registered (default)
|
|
[ 0.731491] io scheduler mq-deadline registered
|
|
[ 0.731501] io scheduler kyber registered
|
|
[ 0.737324] pinctrl-single 4a003400.pinmux: 282 pins, size 1128
|
|
[ 0.744751] V3_3D: supplied by smps9
|
|
[ 0.744988] aic_dvdd: supplied by V3_3D
|
|
[ 0.745051] vtt_fixed: supplied by V3_3D
|
|
[ 0.791562] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
|
|
[ 0.795118] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 43, base_baud = 3000000) is a 8250
|
|
[ 0.796063] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250
|
|
[ 1.774715] console [ttyS2] enabled
|
|
[ 1.779142] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 45, base_baud = 3000000) is a 8250
|
|
[ 1.790040] omap_rng 48090000.rng: Random Number Generator ver. 20
|
|
[ 1.790591] random: crng init done
|
|
[ 1.799866] omapdss_dss 58000000.dss: Linked as a consumer to regulator.22
|
|
[ 1.806916] DSS: OMAP DSS rev 6.1
|
|
[ 1.813253] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15
|
|
[ 1.820760] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15
|
|
[ 1.841105] brd: module loaded
|
|
[ 1.850462] loop: module loaded
|
|
[ 1.859408] m25p80 spi0.0: found n25q256ax1, expected s25fl256s1
|
|
[ 1.865754] m25p80 spi0.0: n25q256ax1 (32768 Kbytes)
|
|
[ 1.870809] 7 fixed-partitions partitions found on MTD device spi0.0
|
|
[ 1.877235] Creating 7 MTD partitions on "spi0.0":
|
|
[ 1.882074] 0x000000000000-0x000000040000 : "QSPI.SPL"
|
|
[ 1.887953] 0x000000040000-0x000000140000 : "QSPI.u-boot"
|
|
[ 1.894103] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"
|
|
[ 1.900808] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"
|
|
[ 1.907289] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"
|
|
[ 1.914481] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"
|
|
[ 1.920569] 0x0000009e0000-0x000002000000 : "QSPI.file-system"
|
|
[ 1.927762] libphy: Fixed MDIO Bus: probed
|
|
[ 1.935122] i2c /dev entries driver
|
|
[ 1.941784] gpio-fan gpio_fan: GPIO fan initialized
|
|
[ 1.975447] cpu cpu0: Linked as a consumer to regulator.6
|
|
[ 1.980954] cpu cpu0: Linked as a consumer to regulator.29
|
|
[ 1.988124] sdhci: Secure Digital Host Controller Interface driver
|
|
[ 1.994404] sdhci: Copyright(c) Pierre Ossman
|
|
[ 1.999928] sdhci-pltfm: SDHCI platform and OF driver helper
|
|
[ 2.006271] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)
|
|
[ 2.015125] sdhci-omap 4809c000.mmc: Got CD GPIO
|
|
[ 2.019925] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.28
|
|
[ 2.026967] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13
|
|
[ 2.034123] sdhci-omap 4809c000.mmc: Dropping the link to regulator.13
|
|
[ 2.040728] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.2
|
|
[ 2.047678] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13
|
|
[ 2.054859] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
|
|
[ 2.087324] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA
|
|
[ 2.094863] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2
|
|
[ 2.101660] sdhci-omap 480b4000.mmc: Dropping the link to regulator.2
|
|
[ 2.108232] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2
|
|
[ 2.115150] sdhci-omap 480b4000.mmc: Cannot get pinctrl
|
|
[ 2.122328] ledtrig-cpu: registered to indicate activity on CPUs
|
|
[ 2.130858] ad799x 4-0029: Linked as a consumer to regulator.2
|
|
[ 2.136828] ad799x 4-0029: 4-0029 supply vref not found, using dummy regulator
|
|
[ 2.144187] ad799x 4-0029: Linked as a consumer to regulator.0
|
|
[ 2.152448] NET: Registered protocol family 10
|
|
[ 2.157417] Segment Routing with IPv6
|
|
[ 2.161132] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
|
|
[ 2.167621] NET: Registered protocol family 17
|
|
[ 2.172368] Key type dns_resolver registered
|
|
[ 2.176881] Registering SWP/SWPB emulation handler
|
|
[ 2.181769] omap_voltage_late_init: Voltage driver support not added
|
|
[ 2.188206] Power Management for TI OMAP4+ devices.
|
|
[ 2.193739] Loading compiled-in X.509 certificates
|
|
[ 2.202683] mmc0: host does not support reading read-only switch, assuming write-enable
|
|
[ 2.212896] mmc0: new high speed SDHC card at address 59b4
|
|
[ 2.219567] dmm 4e000000.dmm: workaround for errata i878 in use
|
|
[ 2.226863] dmm 4e000000.dmm: initialized all PAT entries
|
|
[ 2.229057] mmcblk0: mmc0:59b4 EB2MW 29.8 GiB
|
|
[ 2.233324] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15
|
|
[ 2.244276] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15
|
|
[ 2.252719] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15
|
|
[ 2.260540] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)
|
|
[ 2.268591] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops)
|
|
[ 2.276696] mmcblk0: p1 p2
|
|
[ 2.277482] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
|
|
[ 2.286197] [drm] No driver support for vblank timestamp query.
|
|
[ 2.433607] [drm] Enabling DMM ywrap scrolling
|
|
[ 2.451352] Console: switching to colour frame buffer device 240x67
|
|
[ 2.469803] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
|
|
[ 2.476948] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0
|
|
[ 2.484556] hctosys: unable to open rtc device (rtc0)
|
|
[ 2.490169] ALSA device list:
|
|
[ 2.493177] No soundcards found.
|
|
[ 2.847298] EXT4-fs (mmcblk0p2): recovery complete
|
|
[ 2.864033] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
|
|
[ 2.872337] VFS: Mounted root (ext4 filesystem) on device 179:2.
|
|
[ 2.879766] devtmpfs: mounted
|
|
[ 2.883871] Freeing unused kernel memory: 2048K
|
|
[ 2.888551] Run /sbin/init as init process
|
|
[ 3.244960] systemd[1]: System time before build time, advancing clock.
|
|
[ 3.276276] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPT)
|
|
[ 3.298432] systemd[1]: Detected architecture arm.
|
|
|
|
Welcome to Arago 2019.11!
|
|
|
|
[ 3.332782] systemd[1]: Set hostname to <mitysom-am57x>.
|
|
[ 3.565526] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but t.
|
|
[ 3.582731] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP )
|
|
[ 3.862785] systemd[1]: Reached target Remote File Systems.
|
|
[ OK ] Reached target Remote File Systems.
|
|
[ 3.908211] systemd[1]: Listening on Process Core Dump Socket.
|
|
[ OK ] Listening on Process Core Dump Socket.
|
|
[ 3.942060] systemd[1]: Listening on initctl Compatibility Named Pipe.
|
|
[ OK ] Listening on initctl Compatibility Named Pipe.
|
|
[ 3.982214] systemd[1]: Listening on Journal Socket.
|
|
[ OK ] Listening on Journal Socket.
|
|
[ 4.012357] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
|
|
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
|
|
Mounting Kernel Debug File System...
|
|
[ OK ] Created slice system-getty.slice.
|
|
[ OK ] Started Forward Password Requests to Wall Directory Watch.
|
|
[ OK ] Reached target Paths.
|
|
[ OK ] Listening on Journal Socket (/dev/log).
|
|
Mounting POSIX Message Queue File System...
|
|
[ OK ] Created slice User and Session Slice.
|
|
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
|
|
Starting Load Kernel Modules...
|
|
[ OK ] Listening on Network Service Netlink Socket.
|
|
[ 4.356836] cmemk: loading out-of-tree module taints kernel.
|
|
[ OK ] Listening on udev Kernel Socket.
|
|
[ 4.364476] CMEMK module: reference Linux version 4.19.94
|
|
[ 4.374383] allocated heap buffer 0x40500000 of size 0x100000
|
|
[ 4.380209] cmemk initialized
|
|
[[ 4.392518] cryptodev: driver 1.9 loaded.
|
|
OK ] Listening on udev Control Socket.
|
|
Starting udev Coldplug all Devices...
|
|
Starting Journal Service...
|
|
[ OK ] Reached target Swap.
|
|
[ OK ] Reached target Slices.
|
|
Starting Remount Root and Kernel File Systems...
|
|
[ 4.584215] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
|
|
[ OK ] Created slice system-serial\x2dgetty.slice.
|
|
Mounting Temporary Directory (/tmp)...
|
|
[ OK ] Started Journal Service.
|
|
[ OK ] Mounted Kernel Debug File System.
|
|
[ OK ] Mounted POSIX Message Queue File System.
|
|
[ OK ] Started Load Kernel Modules.
|
|
[ OK ] Started Remount Root and Kernel File Systems.
|
|
[ OK ] Mounted Temporary Directory (/tmp).
|
|
Starting Create Static Device Nodes in /dev...
|
|
Starting Apply Kernel Variables...
|
|
Mounting Kernel Configuration File System...
|
|
Starting Flush Journal to Persistent Storage...
|
|
[ OK ] Started Create Static Device Nodes in /dev.
|
|
[ OK ] Started Apply Kernel Variables.
|
|
[ OK ] Mounted Kernel Configuration File System.
|
|
[ 5.070290] systemd-journald[99]: Received request to flush runtime journal from PID 1
|
|
[ OK ] Reached target Local File Systems (Pre).
|
|
Mounting /media/ram...
|
|
[ OK ] Reached target Containers.
|
|
Mounting /var/volatile...
|
|
Starting udev Kernel Device Manager...
|
|
[ OK ] Started Flush Journal to Persistent Storage.
|
|
[ OK ] Mounted /media/ram.
|
|
[ OK ] Started udev Coldplug all Devices.
|
|
[ OK ] Started udev Kernel Device Manager.
|
|
[ OK ] Mounted /var/volatile.
|
|
Starting Load/Save Random Seed...
|
|
[ OK ] Reached target Local File Systems.
|
|
Starting Create Volatile Files and Directories...
|
|
[ OK ] Started Load/Save Random Seed.
|
|
[ OK ] Started Create Volatile Files and Directories.
|
|
[ 5.535341] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver
|
|
Starting Update UTMP about System Boot/Shutdown...
|
|
[ 5.564882] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver
|
|
Starting Network Service...
|
|
[ 5.598122] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000
|
|
Starting Network Time Synchronization...
|
|
[ 5.635586] remoteproc remoteproc0: 58820000.ipu is available
|
|
[ 5.671269] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver
|
|
[ 5.732340] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver
|
|
[[ 5.752740] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000
|
|
OK ] Found device /dev/ttyS2.
|
|
[ 5.760908] remoteproc remoteproc1: 55020000.ipu is available
|
|
[ OK ] Started Update UTMP about System Boot/Shutdown.
|
|
[ 5.812980] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver
|
|
[ 5.828196] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver
|
|
[ 5.852208] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000
|
|
[ 5.865983] remoteproc remoteproc2: 40800000.dsp is available
|
|
[ 5.879442] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver
|
|
[ 5.888282] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver
|
|
[ 5.914655] omap-rproc 41000000.dsp: assigned reserved memory node dsp2-memory@9f000000
|
|
[ 5.930647] remoteproc remoteproc3: 41000000.dsp is available
|
|
[ 6.196737] remoteproc remoteproc0: powering up 58820000.ipu
|
|
[ 6.202500] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 6916676
|
|
[ 6.214581] virtio_rpmsg_bus virtio0: rpmsg host is online
|
|
[ 6.220826] remoteproc remoteproc0: registered virtio0 (type 7)
|
|
[ 6.231764] remoteproc remoteproc0: remote processor 58820000.ipu is now up
|
|
[ 6.678803] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659038@58:tps659038_rtc as r0
|
|
[ 6.691694] omap_gpio 48051000.gpio: Could not set line 25 debounce to 20000 microseconds (-22)
|
|
[ 6.800968] remoteproc remoteproc1: powering up 55020000.ipu
|
|
[ 6.806750] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 4854132
|
|
[ OK ] Started Network Time Synchronization.
|
|
[ 6.815349] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1
|
|
[ OK ] Reached target System Initialization.
|
|
[ 6.832121] omap_rtc 48838000.rtc: registered as rtc1
|
|
[ 6.837838] Driver for 1-wire Dallas network protocol.
|
|
[ 6.872341] virtio_rpmsg_bus virtio1: rpmsg host is online
|
|
[ 6.873728] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32
|
|
[ 6.877904] remoteproc remoteproc1: registered virtio1 (type 7)
|
|
[ 6.893188] remoteproc remoteproc1: remote processor 55020000.ipu is now up
|
|
[ 6.898671] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33
|
|
[ 6.911684] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c
|
|
[ 6.922742] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65
|
|
[ 6.953781] at24 0-0050: 4096 byte 24c32 EEPROM, read-only, 0 bytes/write
|
|
[ 6.975017] at24 4-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
|
|
[ 7.151766] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode
|
|
[ 7.195124] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.3
|
|
[ 7.204700] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
|
|
[ 7.204736] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.2
|
|
[ 7.217355] omap-des 480a5000.des: will run requests pump with realtime priority
|
|
[ 7.372402] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d
|
|
[ 7.384716] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered.
|
|
[ 7.429065] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
|
|
[ 7.439051] phy phy-4a084000.phy.3: Linked as a consumer to regulator.23
|
|
[ 7.449653] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
|
|
[ 7.456625] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
|
|
[ 7.462474] phy phy-4a085000.phy.4: Linked as a consumer to regulator.23
|
|
[ 7.463426] omap-aes 4b500000.aes: will run requests pump with realtime priority
|
|
[ 7.483479] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
|
|
[ 7.493672] omap-aes 4b700000.aes: will run requests pump with realtime priority
|
|
[ OK ] Listening on D-Bus System Message Bus Socket.
|
|
Starting Reboot and dump vmcore via kexec...
|
|
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
|
|
[ OK ] Listening on RPCbind Server Activation Socket.
|
|
[ OK ] Started Daily Cleanup of Temporary Directories.
|
|
[ 7.784272] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin
|
|
[ OK ] Listening on dropbear.socket.
|
|
[ 7.901883] vpe 489d0000.vpe: Device registered as /dev/video0
|
|
[ OK ] Reached target Sockets.
|
|
[ OK ] Reached target Basic System.
|
|
Starting Print notice about GPLv3 packages...
|
|
Starting TI IPC Daemon...
|
|
Starting RPC Bind Service...
|
|
Starting Login Service...
|
|
[ 8.118685] ahci 4a140000.sata: controller can't do 64bit DMA, forcing 32bit
|
|
[ 8.126121] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok
|
|
[ 8.132235] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1
|
|
Starting rc.pvr.service...
|
|
[ 8.144279] omap-hdmi-audio omap-hdmi-audio.0.auto: ASoC: no DMI vendor name!
|
|
[ OK ] Started D-Bus System Message Bus.
|
|
[ 8.167379] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
|
|
[ 8.176963] ahci 4a140000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
|
|
[ 8.200990] scsi host0: ahci
|
|
[ 8.204423] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 82
|
|
[ OK ] Started Periodic Command Scheduler.
|
|
[ OK ] Started Job spooling tools.
|
|
[ 8.239091] omap_gpio 48051000.gpio: Could not set line 24 debounce to 20000 microseconds (-22)
|
|
Starting TI MultiCore Tools Daemon...
|
|
[ OK ] Reached target System Time Synchronized.
|
|
[ 8.265876] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1
|
|
[ OK ] Started Daily rotation of log files.
|
|
[ OK ] Reached target Timers.
|
|
[ OK ] Started Network Service.
|
|
[ OK ] Started Reboot and dump vmcore via kexec.
|
|
Starting Network Name Resolution...
|
|
Starting Wait for Network to be Configured...
|
|
[ 8.542391] ata1: SATA link down (SStatus 0 SControl 300)
|
|
[ 8.603200] remoteproc remoteproc2: powering up 40800000.dsp
|
|
[ 8.608901] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 20573520
|
|
[ 8.617148] remoteproc remoteproc3: powering up 41000000.dsp
|
|
[ 8.622940] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 20573520
|
|
[ 8.650809] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0
|
|
[ 8.656746] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0
|
|
[ 8.663251] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0
|
|
[ 8.669139] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0
|
|
[ 8.734915] asoc-simple-card sound0: tlv320aic3x-hifi <-> 4847c000.mcasp mapping ok
|
|
[ 8.770079] asoc-simple-card sound0: ASoC: no DMI vendor name!
|
|
[ 8.792166] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6, bus freq 1000000
|
|
[ 8.807445] libphy: 4b2b2400.mdio: probed
|
|
[ 8.819376] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ]
|
|
[ 8.836577] virtio_rpmsg_bus virtio2: rpmsg host is online
|
|
[ 8.837368] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d
|
|
[ 8.870953] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver unknown
|
|
[ 8.887815] remoteproc remoteproc3: registered virtio2 (type 7)
|
|
[ 8.893182] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver unknown
|
|
[ 8.901168] remoteproc remoteproc3: remote processor 41000000.dsp is now up
|
|
[ 8.916270] virtio_rpmsg_bus virtio3: rpmsg host is online
|
|
[ 8.916657] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d
|
|
[ 8.933941] remoteproc remoteproc2: registered virtio3 (type 7)
|
|
[ 8.940146] remoteproc remoteproc2: remote processor 40800000.dsp is now up
|
|
[ 8.966774] remoteproc remoteproc4: 4b234000.pru is available
|
|
[ 8.981873] pru-rproc 4b234000.pru: PRU rproc node pru@4b234000 probed successfully
|
|
[ 9.042479] remoteproc remoteproc5: 4b238000.pru is available
|
|
[ 9.052717] pru-rproc 4b238000.pru: PRU rproc node pru@4b238000 probed successfully
|
|
[ 9.102871] remoteproc remoteproc6: 4b2b4000.pru is available
|
|
[ 9.168603] pru-rproc 4b2b4000.pru: PRU rproc node pru@4b2b4000 probed successfully
|
|
[ OK ] Started Login Service.
|
|
[ 9.200216] remoteproc remoteproc7: 4b2b8000.pru is available
|
|
[ OK ] Started Network Name Resolution.
|
|
[ OK ] Started TI IPC Daemon.
|
|
[ OK ] Started RPC Bind Service.
|
|
[ OK ] Started rc.pvr.service.
|
|
[ OK ] Started TI MultiCore Tools Daemon.
|
|
[ 9.235980] pru-rproc 4b2b8000.pru: PRU rproc node pru@4b2b8000 probed successfully
|
|
[ 9.305070] prueth pruss2_eth: port 2: using random MAC addr: b6:c0:64:9a:42:8a
|
|
[ 9.347866] prueth pruss2_eth: pruss_fw_drop_untagged_vlan 0
|
|
[ 9.396309] prueth pruss2_eth: pruss MC Mask (Port 0) ff:ff:ff:ff:ff:ff
|
|
[ 9.440917] prueth pruss2_eth: pruss MC Mask (Port 1) ff:ff:ff:ff:ff:ff
|
|
[ 9.480384] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized
|
|
[ 10.483636] dwc3 48890000.usb: Failed to get clk 'ref': -2
|
|
[ 10.501057] dwc3 488d0000.usb: Failed to get clk 'ref': -2
|
|
[ 10.507006] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service rpc_example_1 with src 1024 dst 101
|
|
[ 10.508486] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 8
|
|
[ 10.701664] NET: Registered protocol family 45
|
|
[ 10.741314] usbcore: registered new interface driver usbfs
|
|
[ 10.771973] usbcore: registered new interface driver hub
|
|
[ 10.786517] usbcore: registered new device driver usb
|
|
[ 10.822707] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
|
|
[ 10.834287] iep ptp bc clkid -1
|
|
[ 10.837586] remoteproc remoteproc6: powering up 4b2b4000.pru
|
|
[ 10.846868] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
|
|
[ 10.864158] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
|
|
[ 10.873932] xhci-hcd xhci-hcd.1.auto: irq 175, io mem 0x48890000
|
|
[ 10.880474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
|
[ 10.890252] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 10.897805] usb usb1: Product: xHCI Host Controller
|
|
[ 10.903079] usb usb1: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd
|
|
[ 10.910458] usb usb1: SerialNumber: xhci-hcd.1.auto
|
|
[ 10.915782] remoteproc remoteproc6: Booting fw image ti-pruss/am57xx-pru0-prueth-fw.elf, size 7228
|
|
[ 10.927156] hub 1-0:1.0: USB hub found
|
|
[ 10.931917] pruss 4b280000.pruss: configured system_events[63-0] = 00000600,04500000
|
|
[ 10.940833] hub 1-0:1.0: 1 port detected
|
|
[ 10.947922] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
|
|
[ 10.954827] pruss 4b280000.pruss: configured intr_channels = 0x000000d5 host_intr = 0x00000155
|
|
[ 10.964430] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
|
|
[ 10.979181] remoteproc remoteproc6: remote processor 4b2b4000.pru is now up
|
|
[ 10.987157] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
|
|
[ 10.994690] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
|
|
[ 11.003434] net eth0: started
|
|
[ 11.007023] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
|
|
[ 11.014354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
|
|
[ 11.025523] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 11.033344] usb usb2: Product: xHCI Host Controller
|
|
[ 11.038542] usb usb2: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd
|
|
[ 11.046093] usb usb2: SerialNumber: xhci-hcd.1.auto
|
|
[ 11.057641] remoteproc remoteproc7: powering up 4b2b8000.pru
|
|
[ 11.064166] hub 2-0:1.0: USB hub found
|
|
[ 11.068279] hub 2-0:1.0: 1 port detected
|
|
[ 11.075790] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
|
|
[ 11.081319] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
|
|
[ 11.091270] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
|
|
[ 11.101694] xhci-hcd xhci-hcd.2.auto: irq 192, io mem 0x488d0000
|
|
[ 11.108494] remoteproc remoteproc7: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 7256
|
|
[ 11.118037] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
|
|
[ 11.127627] pruss 4b280000.pruss: configured system_events[63-0] = 00600000,08a00000
|
|
[ 11.137477] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 11.137755] pruss 4b280000.pruss: configured intr_channels = 0x0000032a host_intr = 0x000002aa
|
|
[ 11.152670] usb usb3: Product: xHCI Host Controller
|
|
[ 11.158323] usb usb3: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd
|
|
[ 11.159507] remoteproc remoteproc7: remote processor 4b2b8000.pru is now up
|
|
[ 11.179043] net eth1: started
|
|
[ 11.182160] usb usb3: SerialNumber: xhci-hcd.2.auto
|
|
[ 11.183941] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
|
|
[ 11.192567] hub 3-0:1.0: USB hub found
|
|
[ 11.200185] hub 3-0:1.0: 1 port detected
|
|
[ 11.206414] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
|
|
[ 11.212523] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
|
|
[ 11.220222] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
|
|
[ 11.228541] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
|
|
[ 11.237141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
|
|
[ 11.245799] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 11.253964] usb usb4: Product: xHCI Host Controller
|
|
[ 11.258866] usb usb4: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd
|
|
[ 11.269673] usb usb4: SerialNumber: xhci-hcd.2.auto
|
|
[ 11.280799] hub 4-0:1.0: USB hub found
|
|
[ 11.286204] hub 4-0:1.0: 1 port detected
|
|
***************************************************************
|
|
***************************************************************
|
|
NOTICE: This file system contains the following GPLv3 packages:
|
|
autoconf
|
|
bash-dev
|
|
bash
|
|
bc
|
|
binutils-dev
|
|
binutils
|
|
bison-dev
|
|
bison
|
|
cifs-utils
|
|
cpio
|
|
cpp-symlinks
|
|
cpp
|
|
dosfstools
|
|
elfutils-dev
|
|
elfutils
|
|
g++-symlinks
|
|
g++
|
|
gawk
|
|
gcc-symlinks
|
|
gcc
|
|
gdb
|
|
gdbc6x
|
|
gdbserver
|
|
gettext
|
|
glmark2
|
|
gstreamer1.0-libav
|
|
gzip
|
|
hidapi
|
|
libasm1
|
|
libbfd
|
|
libcairo-perf-utils
|
|
libdw1
|
|
libelf1
|
|
libgdbm-compat4
|
|
libgdbm-dev
|
|
libgdbm6
|
|
libgettextlib
|
|
libgettextsrc
|
|
libgmp10
|
|
libidn2-0
|
|
libmpc3
|
|
libmpfr6
|
|
libreadline-dev
|
|
libreadline7
|
|
libunistring2
|
|
m4-dev
|
|
m4
|
|
make
|
|
nettle
|
|
parted
|
|
pdm-anomaly-detection
|
|
rsync
|
|
swig-dev
|
|
swig
|
|
which
|
|
|
|
If you do not wish to distribute GPLv3 components please remove
|
|
the above packages prior to distribution. This can be done using
|
|
the opkg remove command. i.e.:
|
|
opkg remove <package>
|
|
Where <package> is the name printed in the list above
|
|
|
|
NOTE: If the package is a dependency of another package you
|
|
will be notified of the dependent packages. You should
|
|
use the --force-removal-of-dependent-packages option to
|
|
also remove the dependent packages as well
|
|
***************************************************************
|
|
***************************************************************
|
|
[ OK ] Started Print notice about GPLv3 packages.
|
|
Starting Save/Restore Sound Card State...
|
|
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
|
|
[ OK ] Created slice system-systemd\x2dfsck.slice.
|
|
Starting File System Check on /dev/mmcblk0p1...
|
|
Starting weston.service...
|
|
[ OK ] Reached target Host and Network Name Lookups.
|
|
[ OK ] Reached target Network.
|
|
Starting Permit User Sessions...
|
|
Starting Enable and configure wl18xx bluetooth stack...
|
|
Starting Simple Network Management Protocol (SNMP) Daemon....
|
|
Starting Lightning Fast Webserver With Light System Requirements...
|
|
[ OK ] Started NFS status monitor for NFSv2/3 locking..
|
|
Starting Avahi mDNS/DNS-SD Stack...
|
|
[ OK ] Started Save/Restore Sound Card State.
|
|
[ OK ] Started Permit User Sessions.
|
|
[ OK ] Started Enable and configure wl18xx bluetooth stack.
|
|
[ OK ] Started Serial Getty on ttyS2.
|
|
[ OK ] Started Getty on tty1.
|
|
[ OK ] Reached target Login Prompts.
|
|
Starting Synchronize System and HW clocks...
|
|
[ OK ] Reached target Sound Card.
|
|
[ OK ] Started Synchronize System and HW clocks.
|
|
[ OK ] Started File System Check on /dev/mmcblk0p1.
|
|
Mounting /run/media/mmcblk0p1...
|
|
[ OK ] Started Lightning Fast Webserver With Light System Requirements.
|
|
[ OK ] Started Avahi mDNS/DNS-SD Stack.
|
|
[ OK ] Mounted /run/media/mmcblk0p1.
|
|
[ OK ] Started Simple Network Management Protocol (SNMP) Daemon..
|
|
[ OK ] Started weston.service.
|
|
Starting telnetd.service...
|
|
Starting Matrix GUI...
|
|
[ OK ] Started telnetd.service.
|
|
[ OK ] Started Matrix GUI.
|
|
Starting thttpd.service...
|
|
[ OK ] Started thttpd.service.
|
|
|
|
_____ _____ _ _
|
|
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
|
|
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|
|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|
|
|___| |___|
|
|
|
|
Arago Project http://arago-project.org mitysom-am57x ttyS2
|
|
|
|
Arago 2019.11 mitysom-am57x ttyS2
|
|
|
|
mitysom-am57x login: [ 33.121758] aic_dvdd: disabling
|
|
|
|
CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0
|
|
|