|
U-Boot 2013.01.01 (Dec 12 2016 - 10:16:28) Critical Link MitySOM-5CSx
|
|
|
|
CPU : Altera SOCFPGA Platform
|
|
BOARD : Critical Link MitySOM-5CSx Module
|
|
I2C: ready
|
|
DRAM: 1 GiB
|
|
MMC: ALTERA DWMMC: 0
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
Net: mii0
|
|
|
|
preboot reading MMC uBoot ENV data
|
|
|
|
** File not found /etc/uBootStatic.env **
|
|
## Warning: Input data exceeds 1048576 bytes - truncated
|
|
## Info: input data size = 1048578 = 0x100002
|
|
ERROR: Environment import failed: errno = 12
|
|
|
|
at cmd_nvedit.c:1004/do_env_import()
|
|
** File not found /etc/uBoot.env **
|
|
## Warning: Input data exceeds 1048576 bytes - truncated
|
|
## Info: input data size = 1048578 = 0x100002
|
|
ERROR: Environment import failed: errno = 12
|
|
|
|
at cmd_nvedit.c:1004/do_env_import()
|
|
...done
|
|
Hit any key to stop autoboot: 0
|
|
gpio: pin 28 (bank/mask = 0/0x10000000)
|
|
gpio: pin 28 (gpio 28) value is 0
|
|
gpio: pin 28 (bank/mask = 0/0x10000000)
|
|
gpio: pin 28 (gpio 28) value is 1
|
|
gpio: pin 0 (bank/mask = 0/0x00000001)
|
|
gpio: pin 0 (gpio 0) value is 1
|
|
gpio: pin 9 (bank/mask = 0/0x00000200)
|
|
gpio: pin 9 (gpio 9) value is 0
|
|
gpio: pin 9 (bank/mask = 0/0x00000200)
|
|
gpio: pin 9 (gpio 9) value is 1
|
|
1283540 bytes read in 104 ms (11.8 MiB/s)
|
|
## Starting application at 0x3FF775C4 ...
|
|
## Application terminated, rc = 0x0
|
|
3860552 bytes read in 220 ms (16.7 MiB/s)
|
|
22521 bytes read in 34 ms (646.5 KiB/s)
|
|
## Booting kernel from Legacy Image at 00007fc0 ...
|
|
Image Name: Linux-3.16.0-g73a206b
|
|
Image Type: ARM Linux Kernel Image (uncompressed)
|
|
Data Size: 3860488 Bytes = 3.7 MiB
|
|
Load Address: 00008000
|
|
Entry Point: 00008000
|
|
## Flattened Device Tree blob at 00000100
|
|
Booting using the fdt blob at 0x00000100
|
|
XIP Kernel Image ... OK
|
|
OK
|
|
Loading Device Tree to 03ff7000, end 03fff7f8 ... OK
|
|
|
|
Starting kernel ...
|
|
|
|
Booting Linux on physical CPU 0x0
|
|
Initializing cgroup subsys cpuset
|
|
Linux version 3.16.0-g73a206b (brian@ubuntu) (gcc version 4.8.3 20140401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) ) #1 SMP Thu Oct 6 12:33:19 CDT 2016
|
|
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
|
|
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
|
|
Machine model: MitySOM-5CSX Altera SOCFPGA Cyclone V
|
|
Memory policy: Data cache writealloc
|
|
PERCPU: Embedded 8 pages/cpu @9fbd1000 s11008 r8192 d13568 u32768
|
|
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
|
|
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=512M
|
|
PID hash table entries: 2048 (order: 1, 8192 bytes)
|
|
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
|
|
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
|
|
Memory: 511312K/524288K available (5803K kernel code, 289K rwdata, 1588K rodata, 406K init, 155K bss, 12976K reserved, 0K highmem)
|
|
Virtual kernel memory layout:
|
|
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
|
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
|
|
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
|
|
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
|
|
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
|
|
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
|
|
.text : 0x80008000 - 0x807401ac (7393 kB)
|
|
.init : 0x80741000 - 0x807a6b00 ( 407 kB)
|
|
.data : 0x807a8000 - 0x807f0788 ( 290 kB)
|
|
.bss : 0x807f0788 - 0x808176cc ( 156 kB)
|
|
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
|
|
Hierarchical RCU implementation.
|
|
NR_IRQS:16 nr_irqs:16 16
|
|
L2C: platform modifies aux control register: 0x02060000 -> 0x32460000
|
|
L2C: platform provided aux values permit register corruption.
|
|
L2C: DT/platform modifies aux control register: 0x02060000 -> 0x32460000
|
|
L2C-310 erratum 769419 enabled
|
|
L2C-310 enabling early BRESP for Cortex-A9
|
|
L2C-310 full line of zeros enabled for Cortex-A9
|
|
L2C-310 ID prefetch enabled, offset 1 lines
|
|
L2C-310 dynamic clock gating enabled, standby mode enabled
|
|
L2C-310 cache controller enabled, 8 ways, 512 kB
|
|
L2C-310: CACHE_ID 0x410030c9, AUX_CTRL 0x76460001
|
|
sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949672950ns
|
|
Console: colour dummy device 80x30
|
|
Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
|
|
pid_max: default: 32768 minimum: 301
|
|
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
|
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
|
CPU: Testing write buffer coherency: ok
|
|
ftrace: allocating 19655 entries in 58 pages
|
|
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
|
|
Setting up static identity map for 0x53d258 - 0x53d2b0
|
|
CPU1: Booted secondary processor
|
|
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
|
|
Brought up 2 CPUs
|
|
SMP: Total of 2 processors activated.
|
|
CPU: All CPU(s) started in SVC mode.
|
|
devtmpfs: initialized
|
|
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
|
|
NET: Registered protocol family 16
|
|
fpga bridge driver
|
|
DMA: preallocated 256 KiB pool for atomic coherent allocations
|
|
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
|
|
hw-breakpoint: maximum watchpoint size is 4 bytes.
|
|
altera_hps2fpga_bridge soc:fpgabridge@0: fpga bridge [hps2fpga] registered as device hps2fpga
|
|
altera_hps2fpga_bridge soc:fpgabridge@0: init-val not specified
|
|
altera_hps2fpga_bridge soc:fpgabridge@1: fpga bridge [lwhps2fpga] registered as device lwhps2fpga
|
|
altera_hps2fpga_bridge soc:fpgabridge@1: init-val not specified
|
|
altera_hps2fpga_bridge soc:fpgabridge@2: fpga bridge [fpga2hps] registered as device fpga2hps
|
|
altera_hps2fpga_bridge soc:fpgabridge@2: init-val not specified
|
|
FPGA Mangager framework driver
|
|
vgaarb: loaded
|
|
SCSI subsystem initialized
|
|
usbcore: registered new interface driver usbfs
|
|
usbcore: registered new interface driver hub
|
|
usbcore: registered new device driver usb
|
|
pps_core: LinuxPPS API ver. 1 registered
|
|
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
|
PTP clock support registered
|
|
Switched to clocksource timer1
|
|
NET: Registered protocol family 2
|
|
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
|
|
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
|
|
TCP: Hash tables configured (established 4096 bind 4096)
|
|
TCP: reno registered
|
|
UDP hash table entries: 256 (order: 1, 8192 bytes)
|
|
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
|
|
NET: Registered protocol family 1
|
|
RPC: Registered named UNIX socket transport module.
|
|
RPC: Registered udp transport module.
|
|
RPC: Registered tcp transport module.
|
|
RPC: Registered tcp NFSv4.1 backchannel transport module.
|
|
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
|
|
arm-pmu arm-pmu: PMU:CTI successfully enabled for 2 cores
|
|
futex hash table entries: 512 (order: 3, 32768 bytes)
|
|
NFS: Registering the id_resolver key type
|
|
Key type id_resolver registered
|
|
Key type id_legacy registered
|
|
ntfs: driver 2.1.30 [Flags: R/W].
|
|
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
|
|
msgmni has been set to 998
|
|
io scheduler noop registered (default)
|
|
dma-pl330 ffe01000.pdma: Loaded driver for PL330 DMAC-3412784
|
|
dma-pl330 ffe01000.pdma: DBUFF-512x8bytes Num_Chans-8 Num_Peri-32 Num_Events-8
|
|
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
|
|
console [ttyS0] disabled
|
|
ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 194, base_baud = 6250000) is a 16550A
|
|
console [ttyS0] enabled
|
|
ffc03000.serial1: ttyS1 at MMIO 0xffc03000 (irq = 195, base_baud = 6250000) is a 16550A
|
|
ttyAL0 at MMIO 0xff200100 (irq = 75, base_baud = 6250000) is a Altera UART
|
|
ttyAL1 at MMIO 0xff2000e0 (irq = 76, base_baud = 6250000) is a Altera UART
|
|
ttyAL2 at MMIO 0xff2000c0 (irq = 77, base_baud = 6250000) is a Altera UART
|
|
ttyAL3 at MMIO 0xff2000a0 (irq = 72, base_baud = 6250000) is a Altera UART
|
|
ttyAL4 at MMIO 0xff200080 (irq = 73, base_baud = 6250000) is a Altera UART
|
|
ttyAL5 at MMIO 0xff200060 (irq = 74, base_baud = 6250000) is a Altera UART
|
|
ttyAL6 at MMIO 0xff200040 (irq = 73, base_baud = 6250000) is a Altera UART
|
|
ttyAL7 at MMIO 0xff200020 (irq = 74, base_baud = 6250000) is a Altera UART
|
|
altera_fpga_manager ff706000.fpgamgr: fpga manager [Altera FPGA Manager] registered as minor 0
|
|
brd: module loaded
|
|
at24 0-0050: 2048 byte 24c16 EEPROM, writable, 1 bytes/write
|
|
cadence-qspi ff705000.spi: DMA NOT enabled
|
|
cadence-qspi ff705000.spi: master is unqueued, this is deprecated
|
|
m25p80 spi2.0: n25q128a11 (16384 Kbytes)
|
|
6 ofpart partitions found on MTD device spi2.0
|
|
Creating 6 MTD partitions on "spi2.0":
|
|
0x000000000000-0x000000040000 : "Preloader Image 0-3"
|
|
0x000000040000-0x000000050000 : "U-Boot Env"
|
|
0x000000050000-0x000000060000 : "DTB"
|
|
0x000000060000-0x0000000e0000 : "U-Boot"
|
|
0x0000000e0000-0x0000008e0000 : "Kernel"
|
|
0x0000008e0000-0x000001000000 : "FPGA"
|
|
m25p80 spi2.1: unrecognized JEDEC id ffffff
|
|
cadence-qspi ff705000.spi: Cadence QSPI controller driver
|
|
CAN device driver interface
|
|
c_can_platform ffc00000.can: c_can_platform device registered (regs=a08f0000, irq=163)
|
|
stmmac - user ID: 0x10, Synopsys ID: 0x37
|
|
Ring mode enabled
|
|
DMA HW capability register supported
|
|
Enhanced/Alternate descriptors
|
|
Enabled extended descriptors
|
|
RX Checksum Offload Engine supported (type 2)
|
|
TX Checksum insertion supported
|
|
Enable RX Mitigation via HW Watchdog Timer
|
|
stmmac-mdio ff702000.mdio: mdio@ff702000
|
|
libphy: stmmac_mdio: probed
|
|
dwc2 ffb40000.usb: EPs: 15, dedicated fifos, 8064 entries in SPRAM
|
|
dwc2 ffb40000.usb: DWC OTG Controller
|
|
dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1
|
|
dwc2 ffb40000.usb: irq 160, io mem 0x00000000
|
|
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
|
|
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
usb usb1: Product: DWC OTG Controller
|
|
usb usb1: Manufacturer: Linux 3.16.0-g73a206b dwc2_hsotg
|
|
usb usb1: SerialNumber: ffb40000.usb
|
|
hub 1-0:1.0: USB hub found
|
|
hub 1-0:1.0: 1 port detected
|
|
usbcore: registered new interface driver usb-storage
|
|
mousedev: PS/2 mouse device common for all mice
|
|
rtc-ab18xx 0-0069: rtc core: registered ab1803 as rtc0
|
|
rtc-ab18xx 0-0069: 192 bytes nvram
|
|
i2c /dev entries driver
|
|
lm73 0-004c: sensor 'lm73'
|
|
Synopsys Designware Multimedia Card Interface Driver
|
|
dw_mmc ff704000.dwmmc0: no vmmc regulator found: -19
|
|
dw_mmc ff704000.dwmmc0: Using internal DMA controller.
|
|
dw_mmc ff704000.dwmmc0: Version ID is 240a
|
|
dw_mmc ff704000.dwmmc0: DW MMC controller at irq 171, 32 bit host data width, 1024 deep fifo
|
|
dw_mmc ff704000.dwmmc0: 1 slots initialized
|
|
lp5562 0-0030: internal clock used
|
|
ledtrig-cpu: registered to indicate activity on CPUs
|
|
usbcore: registered new interface driver usbhid
|
|
usbhid: USB HID core driver
|
|
oprofile: using arm/armv7-ca9
|
|
TCP: cubic registered
|
|
NET: Registered protocol family 10
|
|
sit: IPv6 over IPv4 tunneling driver
|
|
NET: Registered protocol family 17
|
|
NET: Registered protocol family 15
|
|
can: controller area network core (rev 20120528 abi 9)
|
|
NET: Registered protocol family 29
|
|
can: raw protocol (rev 20120528)
|
|
can: broadcast manager protocol (rev 20120528 t)
|
|
can: netlink gateway (rev 20130117) max_hops=1
|
|
8021q: 802.1Q VLAN Support v1.8
|
|
Key type dns_resolver registered
|
|
ThumbEE CPU extension supported.
|
|
Registering SWP/SWPB emulation handler
|
|
input: soc:gpio_keys as /devices/soc/soc:gpio_keys/input/input0
|
|
Waiting for root device /dev/mmcblk0p2...
|
|
mmc0: BKOPS_EN bit is not set
|
|
mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 52000000Hz, actual 50000000HZ div = 2)
|
|
mmc0: new high speed MMC card at address 0001
|
|
mmcblk0: mmc0:0001 MMC04G 3.65 GiB
|
|
mmcblk0boot0: mmc0:0001 MMC04G partition 1 1.00 MiB
|
|
mmcblk0boot1: mmc0:0001 MMC04G partition 2 1.00 MiB
|
|
mmcblk0: p1 p2 p3
|
|
mmcblk0boot1: unknown partition table
|
|
mmcblk0boot0: unknown partition table
|
|
kjournald starting. Commit interval 5 seconds
|
|
EXT3-fs (mmcblk0p2): using internal journal
|
|
EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
|
|
VFS: Mounted root (ext3 filesystem) on device 179:2.
|
|
devtmpfs: mounted
|
|
Freeing unused kernel memory: 404K (80741000 - 807a6000)
|
|
INIT: version 2.88 booting
|
|
Error opening /dev/fb0: No such file or directory
|
|
Starting udev
|
|
udevd[93]: starting version 182
|
|
random: nonblocking pool is initialized
|
|
Starting Bootlog daemon: bootlogd.
|
|
Configuring network interfaces... done.
|
|
Starting rpcbind daemon...done.
|
|
net.ipv4.conf.default.rp_filter = 1
|
|
net.ipv4.conf.all.rp_filter = 1
|
|
Starting atd: OK
|
|
INIT: Entering runlevel: 5
|
|
Starting system message bus: dbus.
|
|
Starting OpenBSD Secure Shell server: sshd
|
|
done.
|
|
creating NFS state directory: done
|
|
NFS daemon support not enabled in kernel
|
|
Starting system log daemon...0
|
|
Starting kernel log daemon...0
|
|
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ]
|
|
* Starting Avahi Unicast DNS Configuration Daemon: avahi-dnsconfd [ ok ]
|
|
Starting Lighttpd Web Server: lighttpd.
|
|
Starting crond: OK
|
|
Starting Network Interface Plugging Daemon: eth0.
|
|
Stopping Bootlog daemon: bootlogd.
|
|
|
|
Poky (Yocto Project Reference Distro) 1.5.4 mitysom-5cse /dev/ttyS0
|
|
|
|
mitysom-5cse login: stmmaceth ff702000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
|
|
|
|
|